PROJECT SOURCE MXL1137-L24K9027H 11 Inch LED Flushmount Light User Guide
- June 12, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE MXL1137-L24K9027H 11 Inch LED Flushmount Light
Product Information
The 11-IN LED Flush mount Light is a versatile lighting solution that provides bright and efficient illumination. It is available in three different variations:
- Model: #MXL1137-L24K9027H – 2700K (warm white)
- Model: #MXL1137-L24K9027N – 3000K (soft white)
- Model: #MXL1137-L24K9027B – 4000K (cool white)
This product is designed and manufactured by Project Source. It is easy to assemble and comes with comprehensive instructions for your convenience. If you require additional information, please visit Lowes.com and search for the item number. Refer to the Guides & Documents tab on the product’s page for more details. If you have any questions or encounter any issues, our customer service department is available to assist you. You can reach us at 866-389-8827 from 8 a.m. to 8 p.m. EST, Monday to Sunday. Alternatively, you can contact us via email at ascs@lowes.com.
Product Usage Instructions
- Open the package and ensure that all the contents are present.
- Identify the necessary hardware included in the package. It should contain AA batteries and various connecting components.
- Connect the wires as follows:
- L-L: Connect the Live wire from your electrical supply to the Live wire of the flush mount light.
- N-N: Connect the Neutral wire from your electrical supply to the Neutral wire of the flush mount light.
- GND-GND: Connect the Ground wire from your electrical supply to the Ground wire of the flush mount light.
- Securely fasten the flush mount light to the desired location using the provided hardware.
- Insert two AA batteries into the designated battery compartment.
- Switch on the flush mount light to enjoy its bright and efficient illumination.
- Care and Maintenance:
- Regularly clean the surface of the flush mount light using a soft, damp cloth.
- Avoid using abrasive cleaners or solvents that may damage the finish.
Choose the desired color temperature by referencing the labels on the product. The available options are:
- 2700K – Warm White
- 3000K – Soft White
- 4000K – Cool White
- 5000K
- 6500K
By following these instructions, you will be able to assemble and use your
11-IN LED Flushmount Light effectively.
PROJECT SOURCE and logo design are trademarks or registered trademarks of LF,
LLC. All rights reserved.
Thank you for purchasing this Project Source product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page. If you
have any questions or problems, please call our customer service department at
866-389-8827, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
ascs@lowes.com.
TROUBLESHOOTING
CARE AND
MAINTENANCE
Ensure power is off before cleaning. Clean with a mild glass cleaner and soft
cloth. Apply liquid cleaner to cloth. Do not spray fixture itself.
WARRANTY
This fixture is warranted to be free from defects in materials and workmanship
for five (5) years from the date of original purchase. Call
866-389-8827 to obtain a Return
Authorization number and further instructions. The manufacturer will be liable
for the replacement of the defective item and will not be liable for any other
loss, damage, or injury which is caused by the product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes
TOOLS REQUIRED (NOT INCLUDED): FEELING CONFIDENT? START YOUR NEXT
PROJECT/CONFIANT?
Visit www.lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
Be sure the electricity to the wires you are working on is shut off. Either
remove the fuse or turn off the circuit breaker.
CAUTION
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This item is dimmable down to 10% with most dimmers. Use with dimmers listed: LUTRON DVCL-153P-WH, LUTRON MACL-153MLH-WH, LEGRAND RHCL453PTCCCV6, LEGRAND RHCL703PTCCCV4, LUTRON DV-600P-WH, LUTRON MSCL-0P153MH, LUTRON MSCL-VP153MH, EATON SAL06P3.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Loosen both nuts from
the un-hinged studs as shown.
( Note: Do not loosen the one from the hinged/bendable stud).
Select desired color
temperature.
Insert the mounting
screws (AA) about 1.0 inch into the Junction box (Do not screw them all the
way).
Connect: L-L,N-N,GND-
GND.
Place the fixture pan
(A) over the pre-installed mounting screws and the mounting screws should
align with two of the screw holes. Rotate the fixture pan (A) clockwise and
then tighten the screws.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>