PROJECT SOURCE MXL1138-L28K9027H LED Flush Mount Light Instruction Manual

: June 12, 2024
: PROJECT SOURCE

Table of Contents

MXL1138-L28K9027H LED Flush Mount Light
TROUBLESHOOTING
CARE AND MAINTENANCE
WARRANTY
PREPARATION
FEELING CONFIDENT ? START YOUR NEXT PROJECT
**** SAFETY INFORMATION
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ITEM#5209276,#5209284,#5209285
14-IN LED FLUSHMOUNT LIGHT
PROJECT SOURCE MXL1138 L28K9027H LED Flush Mount Light -
Cover QUICK REFERENCE GUIDE
MODEL
#MXL1138-L28K9027H, #MXL1138-L28K9027N, #MXL1138-L28K9027B

MXL1138-L28K9027H LED Flush Mount Light

Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service department at 866-389-8827, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com.

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	CORRECTIVE ACTION
Fixture does not light.	Power is off, incorrect wire connection, or defective
wall switch.	Check circuit breaker or wall switch, check wire splices, or

replace wall switch.

CARE AND MAINTENANCE

Ensure power is off before cleaning. Clean with a mild glass cleaner and soft cloth. Apply liquid cleaner to cloth. Do not spray fixture itself.

WARRANTY

This fixture is warranted to be free from defects in materials and workmanship for five (5) years from the date of original purchase. Call 866-389-8827 to obtain a Return Authorization number and further instructions. The manufacturer will be liable for the replacement of the defective item and will not be liable for any other loss, damage, or injury which is caused by the product.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 15 minutes

TOOLS REQUIRED (NOT INCLUDED)

FEELING CONFIDENT ? START YOUR NEXT PROJECT

Visit www.lowes.com for more information.

PROJECT SOURCE MXL1138 L28K9027H LED Flush Mount Light - PREPARATION
2

Printed in China

**** SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.

CAUTION

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This item is dimmable down to 10% with most dimmers. Use with dimmers listed: LUTRON DVCL-153P-WH, LUTRON MACL-153MLH-WH, LEGRAND RHCL453PTCCCV6, LEGRAND RHCL703PTCCCV4, LUTRON DV-600P-WH, LUTRON MSCL-0P153MH, LUTRON MSCL-VP153MH

PACKAGE CONTENTS

PROJECT SOURCE MXL1138 L28K9027H LED Flush Mount Light - PACKAGE CONTENTS
1

HARDWARE CONTENTS

INSTALLATION OVERVIEW

Loosen both nuts from the un-hinged studs as shown.
(Note: Do not loosen the one from the hinged/bendable stud).

Select desired color temperature.

Insert the mounting screws (AA) about 1.0 inch into the Junction box (Do not screw them all the way)

Connect: L-L,N-N,GND-GND.

Place the fixture pan (A) over the pre-installed mounting screws and the mounting screws should align with two of the screw holes. Rotate the fixture pan (A) clockwise and then tighten the screws.