CRYSTORAMA ADD-312-AG-WH Addis 12 Light Aged Brass Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ADD-312-AG-WH Addis 12 Light Aged Brass Chandelier
ADD-312-AG-WH Product Information
Product Name: ADD-312-AG-WH
Brand: Crystorama.com
Fixture Type: Chandelier Tier Configuration: 7 tiers
Glass Sets: 61 pieces of white glass measuring 2 3/4×7 3/4 inches each
Dry Rated: Yes Product Usage Instructions:
Dress the glass from tier #7.
All electrical components must be
installed by a licensed electrician in accordance with the National Electric
Code and the appropriate local electrical codes.
You will need 12-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
This Fixture is Dry Rated
How to Install
- Determine the desired hanging height and select the appropriate number of rods.
- Thread the wires and safety cable through the rods, screw collar ring, and canopy. Connect the rods together. Attach one end of the rod assembly to the top of the frame and the other end to the swivel on the mounting strap.
- Position the mounting strap over the outlet box and mark two points on the ceiling that are equidistant from each other as the holes on the mounting strap.
- Drill holes at the marked points and insert plastic anchors into them.
- Lift the fixture up to the ceiling and wrap the safety cable around the mounting strap. Secure it with the locking device. Once wire connections are made, slide the canopy up along the rods and over the mounting strap. Secure it with the screw collar ring. 6
- Install the bulb into the socket.
- Dress the glass according to the provided illustration.
- Decide the preferred hanging height and choose the correct number of rods needed.
- Feed the wires and safety cable through the rods,screw collar ring and canopy. Screw the rods together. Screw one end of the rod assembly onto the top of frame and the other end onto the swivel on the mounting strap.
- Place the mounting strap over the outlet box and mark the two points on the ceiling with same distance as between the two holes on the mounting strap.
- Drill the holes at the marked points and insert the plastic anchors into the holes.
- Raise the fixture up to the ceiling and wrap the safety cable around the mounting strap and secure with the locking device. When the wire connections are made, slip the canopy up along the rods and over the mounting strap. Secure with the screw collar ring.
- Install the bulb into the socket.
- Dress the glass as illustrated.
Glass Sets
- 61 pcs White glass 2 3/4×7 3/4”
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer and or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Note: T his fixture is suitable for dry locations only.
Parts Description: A.
Canopy – Dimensions: 5 1/2XH1 inches
Part Number: XBN312AGCAN5.5IN B. Collar Ring
Part Number: XBN300AGCOLR C.
Swivel – Part Number: XBN300AGSWVL D. 6 Rod
Dimensions: 6 inches
Part Number: XBN300AGROD6IN E. 12 Rods
Dimensions: 12 inches eac
Part Number: XBN300AGROD12IN F. Frame
Part Number: XBN300AGFRAME G. Glass
Dimensions: D2 3/4xH7 3/4 inches
Part Number: XBN300AGWHGLA7.75IN
Please follow the installation instructions carefully to ensure proper
installation and usage of the ADD-312-AG-WH chandelier.
Part Number
- A. (1)-Canopy,D 5 1/2XH1” XBN312AGCAN5.5IN
- B. (1)-Collar ring
- C. (1)-Swivel
- D. (1)- 6″ Rod – XBN300AGROD6IN
- E. (3) – 12″ Rods – XBN300AGROD12IN
- F.(1)-Frame
- G.(61)-Glass,D2 3/4xH7 3/4″ XBN300AGWHGLA7.75IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>