ALLDATA Engine Coolant Thermostat for RAM 2500 Truck Installation Guide
- June 12, 2024
- alldata
Table of Contents
ALLDATA Engine Coolant Thermostat for RAM 2500 Truck
Product Information
The Engine Coolant Thermostat is a component of the cooling system in the 2015
Dodge or Ram Truck RAM 2500 Truck 4WD V8-6.4L.
It helps regulate the flow of coolant through the engine to maintain optimal
operating temperature.
Product Usage Instructions
Installation
- Ensure the vehicle is turned off and the engine has cooled down.
- Locate the electric thermostat wire harness connector (2) and connect it to the appropriate port.
- Take the radiator hose and install it onto the thermostat housing, ensuring a secure fit.
- Refer to the cooling system’s standard procedure to fill the cooling system with coolant.
- Connect the negative battery cable.
- Start the engine and allow it to warm up.
- Check for any signs of coolant leaks.
For more detailed instructions and diagrams, please refer to the official
user
manual.
https://my.alldata.com/repair/#/repair/article/54736/component/3047/itype/401/nonstandard/210482/selfRefLink/false
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>