allen roth FSI 1801 Drapery Rod Instruction Manual

June 12, 2024
Allen+Roth

allen roth FSI 1801 Drapery Rod

allen-roth-FSI-1801-Drapery-Rod-PRODUCT

ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved. Estimated Assembly Time: 30 minutes Temps d’assemblage approximatif : 30 minutes Tiempo estimado de ensamblaje: 30 minutos POSSIBLE
INCLUSE  – AA x 3 – BB x 6 – CC x 6 NOTE/REMARQUE/NOTA – B 6 lock rod in place.

NOTE
Product Information: This product is manufactured by ALLEN+ROTH and features its logo design. ALLEN+ROTH and the logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Assembly Time
The estimated time required to assemble this product is approximately 30 minutes. Possible Cause: This section discusses possible causes of any issues that may arise during the usage of the product. It provides troubleshooting information.

Care and Maintenance

This section provides instructions on how to properly care for and maintain the product to ensure its longevity and optimal performance. Package Contents: The package includes the following items: – A x 3 – B x 2 Hardware Contents: The hardware contents include the following items: – AA x 3 – BB x 6 – CC x 6 Product Usage Instructions: 1. Start by unpacking the package contents and organizing them for assembly. Follow the assembly instructions provided in the user manual to assemble the product. Use the hardware contents listed to secure the different parts together during assembly. Refer to the troubleshooting section if any issues arise during the assembly process. Once assembled, follow the care and maintenance instructions to keep the product in good condition.If any issues persist or if additional assistance is required, please contact customer support for further guidance. Please note that this response is based on the limited information provided by the user manual. For more detailed and specific instructions, it is recommended to refer to the complete user manual that came with the product. ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved

Thank you for purchasing this Allen + Roth product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search for the item number, and refer to the Guides & Documents tab on the products page. If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-439-9800, 8 a.m. – 8 p.m., EST, Mondo _ Sundey Vou could oleo contact.

TROUBLESHOOTING

allen-roth-FSI-1801-Drapery-Rod-FIG-1

PREPARATION/PREPARATION/PREPARACION
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
Estimated Assembly Time: 30 minutes

FEELING CONFIDENT? START YOUR NEXT PROJECT/CONFIDANT?

Visit lowes.com for more information

CARE AND MAINTENANCE

  • Clean with a soft cloth.
  • Do not use abrasive cleaning agents, solvents, or polishes as they may damage the finish.

TOOLS REQUIRED

FEELING CONFIDENT? START YOUR NEXT PROJECT/CONFIDANT?

PACKAGE CONTENTS

HARDWARE CONTENTS

allen-roth-FSI-1801-Drapery-Rod-FIG-5

INSTALLATION OVERVIEW

  1. Using the bracket as a guide, adjust to the desired height and Mark the location on the wall for mounting screws
  2. Remove the bracket from the wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors
  3. Attach the bracket to the wall using the screws provided. Next, adjust the bracket distance out from the wall as desired and tighten it with the screws provided
  4. Extend the telescopic rod slightly.
  5. Slide additional rod over smaller diameter rod
  6. Reattach the finial and tighten the set screws on the brackets to lock the rod in place.

NOTE
At this point, you should have a complete telescopic rod with large diameter rods connected with 1 smaller diameter rod section in the middle.

NOTE
Add drapery (sold separately), extend the rod to the desired length, and hang the ready rod in brackets.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Allen+Roth User Manuals

Related Manuals