Bytech BCAUBS134BK Bluetooth Wireless LED Speaker-Owner’s Manual
- June 4, 2024
- Bytech
Table of Contents
Bytech BCAUBS134BK Bluetooth Wireless LED Speaker
Specification
- Brand Bytech
- Model Number BCAUBS134BK
- Speaker Maximum Output Power 20 Watts
- Frequency Response 20 KHz
- Connectivity Technology Bluetooth
- Color Black
- Dimensions 4.75 x 5.5 x 8.5 inches
- Speaker Type Surround Sound
- Weight 1.3 pounds
- Batteries 1 Lithium Ion batteries are required.
Product Details
Every home needs an electronics expert, someone who can decide if it makes sense to buy the latest equipment. If you are a gadget freak, our Electronics catalog is your dream destination. If you’re still stuck at the basics, our elaborate product specifications shall handhold.
Features
- LED PERFORMANCE LIGHTS Enjoy your music on this wireless speaker, in a stylish black, to the flashing of these cool LED performance lights.
- CONVENIENT CARRYING HANDLE Perfect for the on-the-go thanks to the convenient carrying handle. Light enough to carry around, you’ll be able to take your music with you.
- UNIVERSAL BLUETOOTH Wirelessly connects to your smartphone or tablet with this Bluetooth-enabled speaker.
- SURROUND SOUND Enjoy high-quality surround sound with this Bluetooth-enabled wireless speaker.
- PERFECT FOR PARTIES Thanks to the portability of this speaker, this is great to use at parties, the beach, or anywhere you want to liven things up and get people dancing.
Note Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Product Description
- FULL RANGE SOUND
WARNING – California Proposition 65
WARNING This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Warranty & Support
If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.
FAQs
How do I connect my bytech Bluetooth speaker?
Bluetooth setting. Turn on Bluetooth on your device, then search for new devices. Pair with it when you find it. Devices can automatically connect to one another after pairing.
How do I know when my bytech speaker is charged?
Charging. Connect To the Micro USB port on the back of the speaker, attach a short Micro USB charging cable (included). The LED indicator will turn red during charging. To use an AC adaptor, connect the bigger end of the cable to the USB port on your computer.
How long does it take for a bytech speaker to charge?
roughly 3 to 4 hours. The battery needs three to four hours to charge fully, after which the red LED will stop flashing. Micro SD Function: Press “MODE” on the product to enter TF mode while the speaker is on, or just insert a Micro SD card.
Why my wireless speaker is not working?
Ensure that the music is playing on your source device. Move the Bluetooth speaker as far away from metal objects and other potential interference- causing gadgets as you can. Make sure nothing is plugged into the wireless speaker’s AUDIO IN port.
How do I reset my bytech?
Make sure L&R unplug from any devices. (Unplug the Bluetooth device that was previously connected). Triple-tap the left and right earbuds’ touch surfaces. The earphones are now prepared to link with your device once you hear the prompt tone.
Why is my bytech speaker beeping?
This occurs as a result of a low battery warning, a device connection, or when charging is finished. Depending on the state of your Bluetooth speaker, the frequency, tone, and intensity of the beeping sounds will change.
How do you turn the volume up on a bytech speaker?
You must press and hold the button for 1-2 full seconds before the speaker’s volume increases. A single tap should control volume up or down, and a lengthy press should activate the “next” or “back” feature to make the product more user-friendly. On my phone, the Bluetooth pairing procedure went without a hitch.
How do you use bytech?
Join your charger to an AC power source. Set the charger down on a flat, level surface. With the display facing up, place your device on the charger. A few seconds after you place your device on your wireless charger, it should begin to charge. Two devices can be charged at once with this dual wireless charger.
How do I pair my bytech boost link speakers?
In TWS mode, couple both speakers (both speakers will play at the same time in stereo mode) Long press the pause button after long pressing the power button U on both speakers to turn them on (a blue light will flash). I turn on both speakers in TWS pairing mode (one speaker’s blue light will remain on, while the other speaker’s blue light will turn off).
Why is bytech Bluetooth not finding devices?
Your phone may not be “discoverable” even if bytech Bluetooth is enabled. Therefore, a bytech Bluetooth device that you haven’t yet associated with is unable to view your phone. Open the primary bytech Bluetooth settings to make it visible to other devices. As long as you are on that screen, Android phones continue to be discoverable.
How do you reset a bytech speaker?
Remove the bytech speaker or display’s power plug. Give it a minute without power. Reconnect the power cord.
How do I know if my wireless speaker is working?
The LED of the wireless speaker pad will glow blue. The battery symbol will change to a fully charged icon and the device indicator LED will turn green after the charging is finished. The LED will become green in the wireless speaker.
How do I know if my phone is bytech enabled?
Therefore, a fast method to determine this is whether your gadget bears the bytech emblem. You can use the bytech standard to wirelessly charge your gadget if it supports it.
Why is no sound coming out of my bytech speakers?
Check the connections for the bytech speakers. Make sure your bytech speakers are plugged in correctly by inspecting the connections on the back of the bytech speaker. Reconnect any loose connections by plugging them in once more to maintain the connection. You could have a loose connection if your bytech speaker isn’t working
Why is the blue light flashing on my bytech Bluetooth speaker?
A strong connection may be indicated by a blue light that blinks continuously. The speaker may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>