GE APPLIANCES Fit Plus LN Smart Body Fat Scale User Manual
- June 16, 2024
- GE Appliances
Table of Contents
GE APPLIANCES Fit Plus LN Smart Body Fat Scale
Precautions
Read carefully before use:
Do not use the body fat scale if you have a pacemaker or any other internal
medical device in your body. When you take a measurement, the scale passes a
very low, harmless electrical current through your body. The current may cause
your internal medical devices to malfunction.
Do not use the scale on a wet surface. This could lead to slipping.
Dispose of the scale properly following your local regulations.
Do not jump on the scale. This scale has a weight limit of 500 lbs.
Scale Overview
GE Fit Plus LN Smart Body Fat Scale measures weight, BMI, body fat%, and other body compositions using bioelectrical impedance analysis (BIA) technology. This smart scale is intended for home use only.
Scale Layout
- LED Display
- Electrodes
- Tempered Glass Surface
- Scale Feet
- Battery Box
Model : Fit Plus LN
Dimensions : 11.81×11.81 x0.94 inch / 300x300x24mm
Weight : 3.7Ib 11.7kg
Weighing Range : 0.4- 500 lb/ 0.2 – 226.8 kg
Power : 3•1.5V AAA battery
Get Started
Initial setup requires one-time device pairing and create your profile in the app. All data are viewable on your scale afterward, no phone needed.
Download the app and create an account
- Download the app. Go to the App Store for iOS or Google Play Store for Android, and search for “Fit Profile”, or scan the QR code below.
- Sign up and complete your profile.
Scan QR code to download the app
|
Sign up
---|---
Pair scale with smartphone
Make sure Bluetooth is enabled on your phone. For Android 6.0 and above, Location also needs to be enabled.
Pairing is done automatically, and Bluetooth icon is displayed on the scale screen.
- Place the scale on a hard flat floor surface.
- Open “Fil Profile” app and turn on your smartphone Bluetooth.
- Click “Pair the Device” in app home page, Or click the icon at the top-right-hand corner and lap “My Device”, and then click “Smart Bathroom Scale” icon
- Turn on the scale by briefly stepping on and off it.
- Select “Fit Plus LN” and click “Connect”.
Your scale has now been successfully paired with your smartphone and is ready
to start taking your measurements.
Note : If you didn’t fill your height and more data, please finish before
taking measurement in order all data can display and measure accurately.
-
Download Fil Profile app and register
-
Select unit
-
“Pair the device” in app home page and tap your scale to connect
-
Add height and more data then step on scale to measure
Take measurements
-
Open the “Fil Profile” app, and then keep the app open on the “Home” screen.
-
Place the scale on a hard flat floor surface, do not place ii on carpet or any other soft surfaces.
-
Turn on the scale by stepping on and off, waiting for “0.0” display on the screen.
-
Step on the scale while barefoot till the buzzer beeps twice, or all numbers display on the scale. Your measurement is over, and the results will also display on the app .
*How to close or open the buzzer?
- Keep the scale on; and ensure Bluetooth icon is displayed.
- In the app, click the scale icon at the top-right.
- Toggle the “Buzzer” button to open/close.
Measurement Tips
To have accurate, consistent and comparable measurement results, there are some DO’s and DON’Ts.
DO’ s
- Ensure the personal information in your profile is correct. Choose “Athlete Mode” if you work out intensively and regularly, or you are a muscular person.
- Place the scale on a hard flat floor surface when you weigh.
- Do calibration each time. Wait for “CAL” back to “0.0”, then step on the scale for measurements.
- Use the scale under the same condition during same hour each day.
- Empty your bladder before weighing.
DON’Ts
- Do not place the scale on a carpet or a soft surface when you weigh.
- Do not measure with socks or shoes on.
- Do not measure when your body is wet. For example, immediately after a shower, bath, sauna, or strenuous exercise.
- Do not measure after drinking a lot of water or alcohol.
- Do not measure if you have a cold or fever.
This smart scale is intended for home use only.
- For people ages 18 years and above, it provides full body composition measurements.
- For children under 10, it only provides weight and BMI measurements.
- For children between the ages of 10 and 17, it provides full body composition measurements. (Please note that the body mass-related items like body fat%, etc., are only for your reference.)
This smart scale is not intended for pregnant women or people with a pacemaker.
Scale Display
Normal working
|
No display
Change battery
|
No wireless ,
connection
|
Try Again
---|---|---|---
Change battery
|
Overload
|
Unstable
weighing
|
Calibrating
Troubleshooting
| Symptom | Cause | Solution |
|---|---|---|
| Low power | Use new 1.5V AAA batteries | |
| Over1oad | Use the scale within 500 lb . | |
| Unstable measurement | Place the scale on the flat, hard surface and measure |
again.
| Unable to calibrate| Place the scale on the flat, hard surface and let the
scale calibrate.
No Display| Auto-off, or no power| Auto-off: Step on then off to tum on the
scale; No power: replace new batteries
Display Weight Only| Not completed profile data in the app| Create your
account and complete your height and more data, weighing with Bluetooth on.
Unable to Sync with App| Lost connection, or scale turns off| Reconnect the
scale: For iPhones, authorize bluetooth; for Android, enable location. Click
the icon on the top-right comer and tap “My Device” -> “+ Add device” on the
app.
Warranty
This product is warranted by the manufacturer against defects in materials and
workmanship for one (1) year from the original date of purchase. Proof of
purchase is required.
This warranty does not cover accidental damage, mistreatment, or unauthorized
repair. Detailed warranty policy: www.fit-profile.com/warranty If you have any issues or questions, please contact
Global eFit Inc.
Contact : Global eFit Inc.
cs@fit-profile.com
866-786-5988 (Mon – Fri. 9:00 am – 5:00
pm, US Central Time)
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio!TV technician for help.
Caution : Changes or modifications not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
ISED Compliance Statements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Customer Support
Global eFit Inc.
17304 Preston Road, Suite 800, Dallas, TX 75252, USA
www.fit-profile.com
cs@fit-profile.com
1-866-786-5988
(loll-free US & Canada; M-F 9:00am – 5:00pm Central Time)
Model of Independent Module Used in This Product: C21007C10
FCC ID: 2BAl6-GEX00
IC: 30163-GEX00
GE is a registered trademark of General Electric Company.
Manufactured under trademark license.
Made in China
Documents / Resources
| GE
APPLIANCES Fit Plus LN Smart Body Fat
Scale
[pdf] User Manual
Fit Plus LN, Fit Plus LN Smart Body Fat Scale, Smart Body Fat Scale, Body Fat
Scale, Fat Scale, Scale
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>