SENVA WD-1 Water Detector Owner’s Manual
- June 14, 2024
- SENVA
Table of Contents
SENVA WD-1 Water Detector
Product Information
Specifications
- Power Supply: 12-30VDC/24VAC +/-15%
- Output: N.C. (Form B) Solid State Relay, Isolated 30VAC/DC, 0.1A (100mA) Max.
- Sensing: Gold-plated electrodes
- Operating Environment: -20 to 70°C / 0-95%RH non-condensing
Description
The WD Series Water Detector is designed for fast moisture sensing with its sensing probes placed close to the surface. It features gold-plated sensing electrodes for long-life and iscompletely submersible.
Product Usage Instructions
Installation
- Choose a suitable location to mount the Water Detector (floor, drip pan, or condensate pan).
- Ensure the sensing probes are close to the surface for optimal moisture detection.
- Follow the installation instructions provided with the product carefully.
Wiring
Connect the power supply according to the specified voltage range and wire the output relay as needed for your application.
Maintenance
Regularly inspect the sensing probes and electrodes for any signs of damage or wear. Clean the detector as needed to maintain accurate sensing.
Troubleshooting
If the Water Detector is not functioning properly, refer to the troubleshooting section in the user manual or contact Senva for assistance.
FAQ
- Q: Is the Water Detector suitable for outdoor use?
- A: The operating environment specified is -20 to 70°C, which may not be suitable for extreme outdoor conditions. It is recommended for indoor use.
- Q: How do I test if the Water Detector is working correctly?
- A: You can perform a simple test by introducing a small amount \of moisture near the sensing probes and checking if the detector triggers the output relay.
Water Detector
Mount to the floor, drip pan, or condensate pan Solid state relay–no moving parts to fail Gold-plated sensing electrodes for long-life completely submersible
DESCRIPTION
The newly improved WD-1 detector is the smallest water detector on the market, designed to detect water in even the tightest spaces. The WD Series is a fully encapsulated low-pressure molding that is not only waterproof but also completely submersible. Its gold-plated sensing probes are strategically positioned for optimal sensitivity to leaks, making it ideal for spot leak detection in various environments, including data centers, critical equipment areas, restrooms, and commercial kitchens. More features. Better value.
APPLICATIONS
- Ideal for spot leak detection
- Computer rooms, data centres, critical equipment, restrooms, or commercial kitchens
- Monitor condensate pans and drains—turn off equipment when pans reach limit
- Great for data centres
FEATURES
- Reliable water detection
- Simple installation—screw, or ram-set to floor or drip pan
- Simple operation—no maintenance
- Solid-state design… no moving parts to fail
- Fully encapsulated for water-proofing… maximum durability
DIMENSIONS
Warning: The datasheet is designed for reference only. Refer to installation instructions that accompany the product and heed all safety instructions. Product improvement is a continuing process at Senva. Changes may occur to products without prior notice
SPECIFICATIONS
- Power Supply 12-30VDC/24VAC +/-15%, 20mA Max.
- Output N.C. (Form B) Solid State Relay, Isolated
- Output Rating 30VAC/DC, 0.1A (100mA) Max.
- Sensing Gold plated electrodes
- Operating Environment -20 to 70oC / 0-95%RH non-condensing
Product improvement is a continual process at Senva and product features and specifications may change without prior notice. Refer to the instructions that accompany the product for installation and wiring.