CRYSTORAMA BYR80100MK Byron 2 Light Outdoor Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA BYR80100MK Byron 2 Light Outdoor Ceiling Mount
Product Information
- Model Number: [Model#]
Part Numbers
- (1) – Mounting hardware,
- (1) – Ceiling pan L12-3/4”xW12-3/4xH3/4”,
- (2) – Cap Nut,
- (2) – Socket,
- Glass panel 111/4 X 31/2 X 1/8 XAR80 100 GLA11.25 IN,
- (2) – Bulb (Not included)
Electrical Danger
Turn power off. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
Usage
Use LED bulbs for extended use. The fixture is wet rated.
Product Usage Instructions
- Ensure that the power is turned off before starting the installation process.
- Install all electrical components, including the mounting hardware, ceiling pan, cap nut, socket, and glass panels, as per the instructions provided by a licensed electrician.
- Use two medium base bulbs with recommended wattage of 40 watts and maximum wattage of 60 watts. LED bulbs are recommended for extended use.
- Make sure to securely attach the glass panels to the fixture.
- The fixture is wet rated, meaning it can be used in locations where it may come into contact with water.
- Follow all safety precautions and guidelines provided by the National Electric Code and the appropriate local electrical codes during installation.
- Refer to the warning regarding lead exposure and visit www.P65Warnings.ca.gov for more information..
Please note that these instructions are a summary and it is important to consult the full user manual for detailed installation and usage guidelines.
ASSEMBLY INSTRUCTION
WARNING
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 2- Medium Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE THE FIXTURE IS WET RATED
How to install
- lnsert the glass panel into the channel on the bottom of cage and secure it with the clip.Note:Please don’t bend the clip to secure the glass until all the glass panels are placed inside the cage.
- lnstall the bulb(not included) into the socket.
- lnstall the cage onto the top cap and secure with the cap nut.
- Place the fixture overthe post and secure with screws.
DIMENSION
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>