Outsunny 01-0876 BBQ Canopy Awning Shelter Instruction Manual
- June 12, 2024
- Outsunny
Table of Contents
Outsunny 01-0876 BBQ Canopy Awning Shelter
Product Information
- Product Model: IN230100025V01_GL_01-0
- Product Model: IN221000809V01_GL_01-0876
- Language: EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
- Region: US_CA
Product Usage Instructions
- Step 1: Unpack the product and make sure all the components are included.
- Step 2: Connect the power cable to the designated power source.
- Step 3: Set up any necessary configurations or settings as per your requirements.
- Step 4: Install any required software or drivers for the product.
- Step 5: Place the product in a suitable location and ensure proper ventilation.
- Step 6: Connect any external devices or peripherals, if applicable.
- Step 7: Turn on the product using the power button.
- Step 8: Follow the on-screen prompts or refer to the user manual for further instructions on using the product.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.Our contact details are
below:
| Country | Phone | |
|---|---|---|
| us | 001-877-644-9366 |
customerservice@aosom.com
CA| 416-792-6088|
customerservice@aosom.ca
UK| 0044-800-240-4004|
enquiries@mhstar.co.uk
DE| 0049-0( 40)-88307530| service@aosom.de
FR| 0033-1-84166106| aosom@mhfrance.fr
ES| 0034-931294512|
atencioncliente@aosom.es
PT| 0034-931294512|
info@aosom.pt
IT| 0039-02494 71447| clienti@aosom.it
IMPORTANT SAFETY NOTICE
Product is NOT INTENDED for the following:
- A safety barrier to prevent unsupervised access to pools, hot tubs, spas, or ponds.
- As load-bearing support for a building, structure, heavy objects, or swings.
- Used in structures that trap wind, rain, or snow that would create extra load on the product.
Accumulated snow must be removed from the roof. DO NOT climb or walk on the roof for any reason. Wear gloves to avoid injury from possible sharp edges of individual elements before assembly. During installation, follow all safety warnings provided with your tools. Some structures may require two or more people to install safely. Check for underground utilities before digging or driving stakes into the ground! It is important during assembly to closely follow the instructions, complete the assembly on a solid level surface and that you follow the instruction to square up, level, and anchor the structure, this will reduce the gap at connections during assembly.
PARTS
HARDWARE
Installation
Done:
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA.
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>