EDCO BTSP117 Wireless LED Speaker User Manual

EDCO BTSP117 Wireless LED Speaker

PRODUCT INFORMATION

Notice: Please read user manual carefully and keep it for your records.

Notice for Use:

1. For the first use, please charge the battery first. Do not play music while charging.
2. Please use certified DC 5V cable for charging.
3. When music is played, if the sound is intermittent, it may be lack of power, please charge it firstly.
4. Activate the Bluetooth feature on the phone, laptops, or tablets, and set the device to search for wireless device.

Specification

• Includes:
  • 1 Bluetooth Speaker
  • 1 Micro USB charging cable
  • 1 User Manual
  • 1 Hanging lanyard
• The hole for hanging lanyard
• ON/OFF Button: Long press to turn on/off the speaker. When you turn on the device, a sound will indicate Bluetooth. Activate the Bluetooth feature on your phone and set the phone to search for Bluetooth device BT SPEAKER. Short press to switch among BT, FM, TF Card, and Aux-in mode.
• Light Mode Button: Long press to turn on or turn off the light.
• Short press to change the different light mode.
• Play/Pause Button: Click to pause or play music; Double click in short time to redial the last number. For incoming calls, click to answer the call, click again to hang up the call, double click to reject the phone call.
• TWS Function (need 2pcs speakers): Prepare 2pcs speakers and turn on, activate your mobile phone’s Bluetooth function. Long press either Play/pause button of the 2 speakers, when you hear the tone, it means the 2 speakers are connected successfully. In the settings on your Bluetooth device, you will search only one BT SPEAKER, and pair with it, then TWS are connected. Long press either Play/pause button of the 2 speakers again to disconnect TWS.
• Next Music/Increase Volume Button: Short press to change to next music. Long press to increase the volume.
• Previous Music/Decrease Volume Button: Short press to change to previous music. Long press to decrease the volume.
• TF Card Reading: Insert the TF card (not included) into the speaker to play MP3 file automatically, to change to previous/next music, adjust the volume by following the speaker buttons.
• Aux-in Mode: Plug 3.5mm cable to the AUX hole (not included), and connect the other end of the 3.5mm cable into your music device such as mobile/MP3/PC. There will be a voice prompt when the AUX mode connection is successful.

Charging

Connect the small end of the Micro USB charging cable (included) to the Micro USB port located on the back of the speaker. Connect the larger end of the cable to your computer’s USB port or an AC adaptor (not included). The LED indicator will turn red while charging. Once fully charged, the red LED will turn off.

Safety instructions

[Insert safety instructions here] Note: Safety instructions were not provided in the text extract. Please refer to the original user manual for safety instructions.

Notice for Use

1. For the first use, please charge the battery first. Do not play music while charging.
2. Please use certified DC 5V cable for charging.
3. When music is played, if the sound is intermittent, it may be lack of power, please charge it firstly.
4. . Active the Bluetooth feature on the phone,laptops or tablets, and set the device to search for wireless device.

Specification

• Bluetooth version: 5.1
• Material: ABS+Metal+PS
• Rechargeable Battery: 500mAh
• Speaker: 1×5W RMS
•   Play time: 1-2H
• Function: BT/TF/AUX/LED/TWS
• Product Size: 797962mm
• Net Weight: 200g
•  LED color changing light
•  With a hanging lanyard

Includes:

• 1*Bluetooth Speaker
• 1*Micro USB charging cable
• 1*User Manual
• 1*Hanging lanyard

Functional buttons

1. ON/OFF ，Mode switch  (BT/FM/TF/AUX）
2. Indicator
3. Volume down/Previous song
4. Play/Pause,TWS
5. Volume up/Next song
6. Charging port
7. TF slot
8. AUX port
9. Speaker
10. Light mode button
11. The hole for hanging lanyard

BUTTON FUCTION

• ON/OFF Button:

  • Long press to turn on/off the speaker.
  • When you turn on the device, a sound will indicate “Bluetooth ”. Activate the Bluetooth feature on your phone, and set the phone to search for Bluetooth device “BT SPEAKER”.
  • Short press to switch among BT,FM,,TF Card and Aux-in mode.
  • In FM mode, short press the play/pause button to complete a frequency auto search. When you find the station that you want, press one more time to save the station in the speaker. Then press the + and – volume buttons to choose the channel you want. If the FM signal is not very strong, you can insert the charging cable to strengthen the signal. (You do not need to plug the cable to charge under this

• Light Mode Button:

  • Long press to turn on or turn of the light.
  • Short press to change the different light mode.

• Play/Pause Button:

  • Click to pause or play music; Double click in short time to redial the last number.
  • For incoming calls, click to answer the call, click again to hang up the call, double click to reject the phone call.

• TWS Function(need 2pcs speakers):

  • Prepare 2pcs speakers and turn on,,activate your mobile phone’s bluetooth funciton. Long press either Play/pause button of the 2 speakers,when you hear the tone, it means the 2 speakers are connected successfully.In the settings on your bluetooth device, you will search only one “BT SPEAKER” ,and pair with it,then TWS are connected.
  • Long press either Play/pause button of the 2 speakers again to disconnect TWS.

• Next Music/Increase Volume Button:

  • Short press to change to next music
  • Long press to increase the volume

• Previous Music/Decrease Volume Button:

  • Short press to change to previous music
  • Long press to decrease the volume

• TF Card Reading:
  Insert the TF card(not include) into the speaker to play MP3 file automatically, to change to previous/next music, adjust the volume by following the speaker buttons.

• Aux-in Mode:
  Plug 3.5mm cable to the AUX hole(not include), and connect the other end of the 3.5mm cable into your music device such as mobile/MP3/PC. There will be a voice prompt when the AUX mode connection is successful.

• Charging:
  Connect the small end of the Micro USB charging cable (included) to the Micro USB port located on the back of the speaker. Connect the larger end of the cable to your computer’s USB port or an AC adaptor(not included).The LED indicator will turn red while charging. Once fully charged, the red LED will turn off.

Safety instructions

• Do not disassemble, throw away or damage this Product. Consult your local waste collection agency for proper disposal or recycling methods. This product is not a toy. Use extra caution while children are using this product.
• Keep the wireless Speaker away from direct sunlight, fire and high voltage equipment. Do not store the Wireless Speaker inside a car during hot weather. Remember, a closed car acts as a greenhouse allowing the inside temperature to possibility reach over 200 degrees. Device may become warm while charging.Be assured to turn product completely off when plugging and unplugging into outlet.
• Damage, shock, and/or injury can occur if this warning is not heeded properly.

FCC& ISED Statement

• This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:
  1. this device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

References

• realtime.at - Domain catched

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>