EVA LOGIK WF96SH Wi-Fi Outdoor Smart Plug Instruction Manual

EVA LOGIK WF96SH Wi-Fi Outdoor Smart Plug

Product Information

The Wi-Fi Outdoor Smart Plug (model WF96SH) is a smart plug designed for outdoor use in damp locations. It allows you to control your devices remotely using the Smart Life app. The smart plug supports Bluetooth quick-fit and a 2.4GHz Wi-Fi network.

Package Contents

• Wi-Fi Outdoor Smart Plug x 1
• Screw x 1
• Plastic Anchor x 1

Important: This unit is suitable for outdoor use in damp locations. Do not expose to rain or immersed in water.

Product Usage Instructions

1. Initial Setup

1. Plug in the device directly to the wall outlet.
2. The smart plug will enter Bluetooth auto-connection mode with LED blinking. If the LED stops blinking, press and hold the button for 5 seconds until the LED blinks again.
3. Use the provided screws and anchor to secure the smart plug to the wall (optional).
4. Plug the device you want to control into the smart plug controlled outlet. Note: Do not use with extension cords, directly plug into the outlet.

2. App Setup

1. Turn on the Bluetooth on your phone.
2. Open the Smart Life app and tap the ‘+’ icon to add the smart plug.
3. Follow the on-screen instructions to add the smart plug. Make sure your phone is connected to the same Wi-Fi network as the smart plug.
4. Edit the name of your new smart plug.

3. Additional Settings

Within the Smart Life app, you can access the following settings:

• Restart status: Set the plug to be on/off after power failure.
• Light mode: Choose the LED indicator to be on when the plug is on/off or keep it on/off all the time.
• Child lock: Enable the child lock function to temporarily disable control functions on other operation keys.

4. Adding Device to Home (for iPhone/iPad)

1. In the Smart Life app, click the icon button in the upper right corner to enter the device details page.
2. Find and click “Add to Homepage”.
3. Look for the code on the accessory or its packaging and position it in the frame.
4. Wait for the connection and make sure the smart plug stays connected to the power source and nearby.
5. Finish adding the smart plug to your home.

5. Adding Devices using iPhone’s own APP

1. Open the home app and click “Add accessory” to enter the page.
2. Select an accessory to add to your home.
3. Check if it is correct.
4. Finish adding the smart plug.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Meet your new smart Plug !

IMPORTANT! This unit is suitable for outdoor use in damp locations. Do not expose to rain or immerse in water.

• (A) Manual / Program button
  Single press: manually turn on/offyour device.
  

• (B) Smart Outlet|
  This is your smart outlet that will be included in your smart home.

• (C) Protector
  Insert in connector when not in use.

For outdoor use

Note:

1. Our products support Bluetooth quick-fit and 2.4GHz Wi-Fi network.
2. Please operate quickly when the white LED indicator blinks rapidly.
3. When indicator flash enters the network, complete standard operation within 3 minutes.
4. If you failed to connect with Wi-Fi network, please try to operate several times more.

Introduction

The EVALOGIK WF96SH is an enabled 15A (1875W) Resistive outdoor smart plug designed for use seasonal and landscape lighting, porch light, fountains, pumps and other indoor and outdoor plug-in appliances.It’s compatible with LED, halogen, incandescent, xenon, fluorescent and compact fluorescent bulbs. Work with Amazon Alexa, Google Assistant. You can use free Appor voice control by Alexa and Google Assistant to operate your devices in your home.

Specifications

• Model: WF96SH
• Power: 125VAC, 60Hz
• Item Size: 568039mm
• Loading: 15A 1875W RESISTIVE OR GENERAL PURPOSE 5A MAX
• Wireless Frequency: 2.4GHz
• Wireless Standard: IEEE802.11b/g/n
• Operating Temperature: -4° F~122° F

Use our screws and anchor to lock it in the wall.(optional)

Plug the light you want to control into the Smart plug controlled outlet.
NOTE: Plug directly into the outlet, do not use with extension cords.

• 1: Plug-in the device directly to the wall outlet. Once plugged in, it will enter into the Bluetooth auto-connection mode.

• White LED indicator
  The auto-connection comes with LED blinks. The LED will blink 3 minutes. If it stopped, please hold the button 5 seconds until the LED blinks again.

• 2: Turn on your Phone bluetooth.

• 3: Tap ‘+’ to add this plug in the “Smart Life” APP.

• 4: You’ll see “Devices to be added”—“Go to add”.

• 5: Enter the Wi-Fi Password (Your phone should have connected to the same Wi-Fi first).

• 6: Wait for the app to connect to your Wi-Fi until it’s 100%.

• 7: Edit the name of your new smart plug!

SETTING

1. Restart status: This parameter can access you to set the plug to be on/off after power failure.
2. Light mode: This parameter can access you to choose the led indicator to be on when the plug is on/off, or the LED indicator remains on/off at all times.
3. Child lock: When the child lock function is ON, any other operation keys will temporarily lose their control functions.

Add device to Home (only for iPhone/iPad)

1. Click the icon button in the upper right corner to enter the device details page, find and click Add to “Homepage”.
2. Click Add to “Home”.
3. Look for the code on the accessory or its packaging and position it in the frame.
4. Waiting for connection make sure it stays connec- ted to the power source and nearby.
5. Finish adding.

Use iPhone’s own APP to add devices

1. Open the “home” app, click “Add accessory” to enter the page. 2: Select an accessory to add to your home.
2. Check if it is correct.
3. Finish adding.

FCC warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
CAUTION – PLEASE READ!
This device (MP22W) is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualified electrician.
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment. This device should never be used to control the On/Off status of Medical and/or Life Support equipment.
OTHER WARNINGS
Risk of Fire / Risk of Electrical Shock / Risk of Burns IMPORTANT SAFETY INSTRUCTIONS

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Read and follow all instructions that are on the product or provided with the product.
3. do not use an extension cord.
4. Reference the National Electrical Code, NFPA 70, specifically for the installation of wiring and clearances from power and lighting conductors.
5. Installation work and electrical wiring must be done by a qualified person(s) in accordance with allapplicable codes and standards, including fire-rated construction.
6. do not install or use within 10 feet of a pool
7. do not use in a bathroom
8. WARNING: Risk of Electric Shock.
   • When used outdoors, install only to a covered Class A GFCIprotected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit andcord do not interfere with completely closing the receptacle cover.
9. WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface
10. WARNING: Risk of Electric fire. install only to a receptacle protected by a 20A branch circuit over current protection.
    • SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>