CRYSTORAMA 2263-AG Jennings 3 Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 2263-AG Jennings 3 Light Ceiling Mount
Product Information
The Crystorama Lighting Model#2263-AG is a stylish and elegant lighting fixture that has been lighting the way for sixty years. It features a metal frame, a fabric shade, a glass diffuser, and a bottom finial. The fixture is dry rated and requires 3-Medium Base Bulbs with a recommended wattage of 40 Watts (maximum 60 Watts). LED bulbs are recommended for extended use. Please note that this product contains lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm.
Product Assembly Instruction
- Thread the mounting screws into the matching holes in the mounting bar.
- Secure the mounting bar to the outlet box using the outlet box screws.
- Connect the fixture wires to the supply wires in the outlet box.
- Raise the ceiling pan to allow for mounting.
How to Replace Bulb To replace the bulb, follow these steps:
- Remove the bottom finial and glass diffuser to access the previous bulb.
- Replace the previous bulb with a new bulb.
- Reassemble the bottom finial and glass diffuser.
For more information, visit: Crystorama.com.
WARNING: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING
- Electrical Danger
- Turn Power off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need
- You will need 3-Medium Base Bulb 40 Watts Recommended 60 Watts Max.
- USE LED BULBS FOR EXTENDED USE
- This fixture is Dry rated
How to install
- Thread the mounting screws into the matching holes in the mounting bar. Secure the mounting bar to outlet box with the outlet box screws.
- Connect fixture wires to supply wires in outlet box.
- Raise the ceiling pan allowing for the mounting screws to protrude through key slots on the ceiling pan. Rotate the ceiling pan clockwise until the mounting screws are in the narrow parts of the key slot then tighten the screws with a screw driver.
- Install the bulb (not included) into the socket.
- Thread the nipple onto the coupling and adjust the length of nipple to fit with the glass. Tighten it with hex nut.
- Slide the glass diffuser, the plastic washer and the metal washer over the nipple, then secure with the hex nut.
- Slide the cap over the nipple, then secure with the bottom finial.
HOW TO REPLACE BULB
- REMOVE BOTTOM FINIAL AND DIFFUSER TO REPLACE PREVIOUS BULB W / NEW BULB.
Dimension
Part Numbers
- A. (1) -Mounting hardware
- B. (1) -Ceiling pan
- C. (1) -Metal frame
- D. (1) -Fabric shade W15-3/8″×H7-1/4″ #XRF2263SHA15.375IN
- E. (2)-Hex nut
- F. (1)-Nipple
- G. (1) -Glass diffuser #XRF2263DIF15.75IN
- H. (1)-Plastic washer
- I. (1)-Metal washer
- J. (1) -Cap #XRF2263AGCAP
- K. (1)-Bottom finial #XRF2263AGFIN
Scan
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>