COOSPO HW9 Armband Heart Rate Monitor User Manual

COOSPO HW9 Armband Heart Rate Monitor

Product Information

The Armband Heart Rate Monitor is a device designed to monitor and track your heart rate during physical activities. It features an optical sensor that detects your heart rate and displays it using LED lights. The monitor can be connected to smart devices, such as fitness equipment and sports watches, via Bluetooth and ANT+ technology. The device is powered by a rechargeable battery and comes with charging terminals for easy charging.

Key Features

• LED lights for heart rate display
• Optical sensor for heart rate detection
• Bluetooth and ANT+ connectivity
• Rechargeable battery with charging terminals

Product Model: HW9-RTN-I1-2317

Product Usage Instructions

Power On/Off:

1. To power on the device, short press the power button. The LED light will blink fast in light blue and the device will vibrate.
2. To power off the device, long press the power button for 2 seconds. The LED light will flash red and the device will vibrate.

Heart Rate Detection:

After powering on the device, the LED light will blink fast in light blue, indicating that the device has not detected the heart rate yet.
Once the heart rate is detected, the LED light can display the heart rate zone.

Connecting to Smart Devices:

1. Select “Add HR sensor” from the smart device settings menu.
2. Find the Bluetooth or ANT+ ID for HW9 and select it to connect.

While the device is working, you can short press the power button to check its Bluetooth connection status:

• If Bluetooth is not connected, the LED light will flash green.
• If Bluetooth is connected, the LED light will flash blue.

Low Battery Alert & Charging:

The device will alert you when the battery is low. To charge the device, connect it to a power source using the charging terminals.
For more information about sensor compatibility and connection instructions, please refer to the Coospo FAQ page.

Function and Operation

• Power on: Short press button ② Light blue LED fast blink and vibrates.
• Power off: Long press the button for 2 seconds. The LED light will flash red and vibrate.
• After powering on, Light blue LED ① fast blink, indicating that the device has not detected the heart rate.
• After the heart rate is detected, LED light ① can display the heart rate zone.

Note: The heart rate zone is calculated based on the maximum heart rate(MHR).
Recommended MHR Calculation: 220 minus your age.
The default MHR value is 200 bpm and can be set in the CoospoRide/Heartool app

OVERVIEW

Wearing

1. Remove the transparent cover ⑤ from the back of HW9.
2. Wear the armband on the upper forearm or on the inner or outer side of the upper arm ③.
3. Adjust the armband to a comfortable length so it stays close to the skin. This will prevent it from sliding or coming loose during intense exercise and ensure accurate heart rate monitoring.
   Note : Please do not wear it on your wrist ④.

Connect to Device

Connect to Sports and Fitness app (Bluetooth)

1. Turn on the Bluetooth on your phone.
2. Find the Sensor Settings Menu in the Sports & Fitness app. Take CoospoRide and Heartool app as example.
3. Go to CoospoRide app > More > Sensors > Heart Rate Or go to Heartool app > Settings > Device > Add Device
4. Find the HW9 Bluetooth ID and select it in the app to connect. Note: Do not pair the sensor in the Bluetooth settings of your phone.

Connect to smart devices, including fitness equipment and sports watches (Bluetooth and ANT+)

1. Select “Add HR sensor” from the smart device settings menu.
2. Find the Bluetooth or ANT+ ID for HW9 and select it to connect.
   While the device is working, short press the button to check its Bluetooth connection status:
   Bluetooth is not connected: LED light flashes green.
   Bluetooth is connected: LED light flashes blue.
   Note: The information about sensor compatibility and connection instructions, please refer to: www.coospo.com/faq/hw9.

Low Battery Alert & Charging

Power<10%, Red LED slow blink for 10 seconds and remind the user every 5 minutes;
Power<1%, Red LED flash, device vibrate and turn off automatically.

1. Connecting the USB magnetic power cable to the device and the power source;
2. Green LED flashes: Charging
3. Green LED is always on: Charging completed
4. Charging time is about 1.5 hours.

Note: To extend battery life, please use a DC 5V power adapter or a computer USB port for charging.

Specifications

Charging Temperature Range

Size

| 10℃~45℃(32°~113℉)
 | 41.3 x 33.8 x 11 mm
Waterproof| IP67

Standard Accessories

• Heart Rate Monitor with Armband x1
• Charging Cable x1
• User Manual x1

Contact us

Website: www.coospo.com
E-mail : [email protected]

Disclaimer

• The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
• We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.

This product is for sports purposes only and it’s not meant to replace any medical device.

FCC statement

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC WARNING

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

DISPOSAL

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

• Do not open or modify the product.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable operating conditions.
• If the product is operating improperly, call COOSPO support.

SCAN for more
詳しくはこちら
Cerca altro
Nach mehr SUCHEN
SCANNEZ pour plus
ESCANEAR para más

References

• Cycling and Fitness Training Products – COOSPO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>