Ethan Allen 09-2013 NAT Farida Alabaster Floor Lamp Instruction Manual

Ethan Allen 09-2013 NAT Farida Alabaster Floor Lamp

Product Information

The Farida Floor Lamp is a stylish and functional lighting fixture that adds a touch of elegance to any room. It features a sleek design with a harp, saddle, shade, finial, socket, and plug cap. The lamp requires a maximum 150W three- way Type A light bulb (not included) for operation.

Product Usage Instructions

1. Use care when unpacking the lamp and make sure to locate all the parts before disposing of the packaging materials.
2. No tools are required for assembly.
3. Start the assembly process by inserting the harp (A) into the saddle (B).
4. Next, install the shade (C) onto the harp (A).
5. Screw the finial (D) onto the harp (A) to secure the shade in place.
6. Install a light bulb (maximum 150W three-way Type A) into the socket saddle (E).
7. Before changing the bulb, make sure to unplug the lamp and allow the bulb to cool down.
8. To use the lamp, remove the plug cap (F) from the plug.

Care and Cleaning

1. Wipe the lamp with a soft dry cloth for regular cleaning.
2. Avoid using cleaners, scouring pads, or any abrasive materials that may damage the lamp’s surface.

Troubleshooting

If you encounter any issues with the lamp, refer to the following troubleshooting steps:

• Problem: Bulb does not light
• Possible Cause: Bulb is burnt out or damaged
• What to Do: Replace the bulb with a new one.
• Problem: Power to lamp is off
• Possible Cause: Confirm power is on
• What to Do: Check if the power is turned on.
• Problem: Lamp is not plugged in
• Possible Cause: Confirm lamp is plugged in
• What to Do: Make sure the lamp is properly plugged into a power outlet.

If the lamp still does not work after troubleshooting, please contact your local Ethan Allen Design Center for further assistance.

Farida Floor Lamp Assembly Instructions
09-2013 NAT

IMPORTANT SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY: This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only the type of bulb specified. Keep flammable materials away from bulb. DO NOT OPEN the product or alter the wiring in any manner. Extension cord: Follow precautions provided with power cord. Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of packaging materials.

ASSEMBLY, CARE, AND TROUBLESHOOTING
No tools are required for assembly. Light bulb is not included.

**Parts Included

**

(refer to figure):

• A. Harp (styles may vary)
• B. Saddle
• C. Shade (may be packed in separate carton)
• D. Finial
• E.Socket (attached, no assembly required)
• F.Plug Cap

Assembly Procedure

(refer to figure):

1. Insert Harp (A) into Saddle ( B).
2. Install Shade (C) onto Harp (A).
3. Screw Finial (D) onto Harp (A).
4. Install lightbulb (150W max, three-way, Type A) into Socket Saddle (E).
5. Remove Plug Cap (F) from plug.

Care and Cleaning

1. Wipe with a soft dry cloth.
2. AVOID cleaners, scouring pads, etc.
3. Before changing bulb, unplug lamp and allow bulb to cool.

TROUBLESHOOTING

After troubleshooting, if the lighting fixture still does not work, contact your local Ethan Allen Design Center.
SAVE THESE INSTRUCTIONS
©2018 Ethan Allen Global, Inc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>