hansgrohe METROPOL S Lever Tap for Wash Basin Instruction Manual

hansgrohe METROPOL S Lever Tap for Wash Basin

Product Information

The product is a shower system that can be used for bathing, hygienic and body cleansing purposes. The shower system comes with an operating pressure of max 1 MPa and a recommended operating pressure of 1.6 MPa. The product has a hot water limiter on single lever mixers which can be adjusted by referring to page 33 of the manual. The shower system can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0.15 MPa. The product comes with spare parts, special accessories, and cleaning instructions that are detailed in the manual.

Product Usage Instructions

When installing the product, gloves should be worn to prevent crushing and cutting injuries. It is important to ensure that the hot and cold supplies have equal pressures to avoid any complications. To adjust the hot water limiter on single lever mixers, please refer to page 33 of the manual. The shower system can be used for bathing, hygienic and body cleansing purposes only. The hot water temperature should be set to the recommended temperature. The product comes with cleaning instructions that should be followed regularly to maintain hygiene. The test certificate is detailed on page 35 of the manual. For assembly instructions, please refer to page 31 of the manual.

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The shower system may only be used for bathing, hygienic and body cleansing purposes.
• The hot and cold supplies must be of equal pressures.

Installation Instructions

• The fitting must be installed, flushed and tested after the valid norms.
• If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

• Operating pressure : max. 1 MPa

• Recommended operating pressure: 0,1 – 0,5 MPa

• Test pressure: 1,6 MPa
  (1 MPa = 10 bar = 147 PSI)

• Hot water temperature: max. 80°C

• Recommended hot water temp.: 65°C
  Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.

Symbol description

Dimensions

Flow diagram

(see page 34)

• with EcoSmart®
• without EcoSmart®

Spare parts

(see page 36)

• 000 chrome plated
• 880 satin chrome

Special accessories

• special tool (58085000) order as an extra
• Installation kit order as an extra

Operation (see page 35)

Cleaning

(see enclosed brochure)

Test certificate (see page 35)

ASSEMBLY INSTRUCTION

References

• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>