SANUS VLT7-B2 Advanced Tilt 4D Premium TV Wall Mount for 42 to 90 Inch Displays Instruction Manual
- June 4, 2024
- SANUS
Table of Contents
SANUS VLT7-B2 Advanced Tilt 4D Premium TV Wall Mount for 42 to 90 Inch
Displays
WE’RE HERE TO HELP
- Want to watch a video that shows how easy this DIY project will be?
- Watch it now at: SANUS.com/2949
- Get it right the first time. Height Finder™ shows you where to drill.
- Check it out at: SANUS.com/2567
- Our install experts are standing by to help.
- Call us at: US: 800-359-5520 EMEA: +31 (0) 495 580 852 UK: 0800 056 2853
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Check your TV owner’s manual to see if there are any special requirements for mounting your TV. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service.
CAUTION: Avoid potential personal injuries and property damage!
- This product is designed ONLY to be installed into wood stud, solid concrete or concrete block or steel stud walls.— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
- This product is designed for INDOOR USE ONLY.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not use this product for any purpose not explicitly specified by manufacturer.
- Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
TV Weight Limit (including accessories)
DO NOT EXCEED
- 150 lbs.
- (68.0 kg)
For Wood Stud Solid Concrete or For Steel Concrete Block Walls Stud Walls
If your TV, plus accessories, weighs MORE than indicated, this mount is NOT compatible. Visit SANUS.com or call customer service to find a compatible mount.
Wall Construction
ONLY install on these acceptable wall types.
- Unsure Call Customer Service
CAUTION:
DO NOT install in drywall alone Drywall alone will NOT hold the weight of
your TV.
Dimensions in. [mm]
BEFORE YOU BEGIN
- Remove the stand from your TV — if attached.
- Install any accessories you may have purchased, if they require TV removal prior to assembly. The TV is removable for future accessory purchases.
- Protect the face of your TV when laying it down for installation.
ATTACH TV BRACKET TO TV
Parts and Hardware for STEP 1
WARNING This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
CAUTION: Avoid potential personal injury or property damage!
- The TV brackets contain potential pinch points during operation. Keep fingers away from pinch points when retracting the TV. (arrows)
Select TV Screw Diameter
Only one screw size fits your TV.
NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.
Select TV Screw Length / Spacers
NO SPACER
- Flat Back TV [TV brackets lay flat on your TV]
- Use short TV screws 01 . Spacers 03 not needed.
SPACER NEEDED
- Flat Back TV with Extra Space Needed [for deep inset holes or cable interference]
- Rounded or Irregular Back TV [TV brackets NOT resting flat on your TV]
Use long TV screws 01 and spacers 03 to create extra space between the TV and TV bracket.
CAUTION: Verify adequate thread engagement with your screw 01 , washer 02 , spacer 03 combination AND TV bracket 04 / 05 .
- Too short will not hold your TV.
- Too long will damage your TV.
Attach TV Bracket Assembly to TV
CAUTION Brackets should be parallel with one another.
ATTACH WALL PLATE TO WALL
Parts and Hardware for STEP 2
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
Wood Stud Installation
CAUTION : Avoid potential personal injury or property damage!
- Drywall covering the wall must not exceed 5/8 in. (1.5 cm)
- Minimum wood stud size: nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
- Minimum horizontal space between fasteners:16 in. (40.6 cm)
- Stud centers must be verified
CAUTION: Avoid potential personal injury or property damage!
Do not over-tighten the lag bolts 08 . Tighten the lag bolts only until they
are pulled firmly against the wall plate 07 .
Solid Concrete or Concrete Block Installation
CAUTION: Avoid potential personal injury or property damage!
- Mount the wall plate 07 directly onto the concrete surface
- Minimum solid concrete thickness: 8 in. (20.3 cm)
- Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
- Minimum horizontal space between fasteners: 16 in. (40.6 cm)
- For concrete applications, TV brackets 04 / 05 must remain centered in wall plate 07 . Keep this in mind when selecting the wall plate location
Steel Stud Installation
CAUTION: Avoid potential personal injury or property damage!
- Studs must be at least 2×4 / 25 gab
- If back side of wall is unfinished, drywall must be installed to a minimum of one stud left and right of the stud(s) being used to install the mount
- Drywall must be a minimum of 1/2 in. (13 mm) thick on each side of the studs, and a minimum clearance of 1 ⅞ in. (48 mm) behind the wall is required
- This product must be centered on the studs
- Stud type and structural strength must conform to the North American Specification for the Design of Cold-Formed Steel Structural Members [362 S 125 18, C-Shape, S – Stud Section]
- Drywall must be secured to studs with screws 12 in. (304.8 mm) on center
ATTACH TV TO WALL PLATE
MANAGE CABLES
TIP: Extend the TV outward AND tilt the TV up or down to gain better access to the back of the TV.
ADJUSTMENTS
LEVEL
To level your TV, turn the level adjustment screw S on the top of either TV
bracket 04 / 05 to raise or lower that respective side of the TV.
HEIGHT
Adjust the height by turning the level adjustment screw S on the top of both
TV brackets 04 / 05 .
SIDE-TO-SIDE SHIFT
- HEAVY! You may need assistance with this step.
CAUTION: Avoid potential personal injury or property damage!
For Concrete Applications, TV brackets 04 / 05 must be centered between the marks on the wall plate rail 07 . For Wood Stud Installations ONLY: Slide the TV left or right along the wall plate 07 to reposition.
Align the brackets between the two lines on the wall plate for minimum profile depth.
TILT
Your TV should adjust easily when moved, then stay in place. Adjust the
tilt tension knob T if your TV naturally tilts up or down.
NOTE: If you do not intend to adjust the tilt for different viewing
locations, you can tighten the tilt tension knobs T to prevent unwanted
movement.
EXTEND
RETRACT
CAUTION: Avoid potential personal injury or property damage!
The TV brackets contain potential pinch points during operation. Keep fingers
away from pinch points when retracting the TV. (see arrows)
REMOVING THE TV
- Disconnect all cables.
- To unlock the TV from the wall plate: Lift the release latch R on both brackets.
- Lift the TV up and off of wall plate 07 .
NOTE: To rehang the TV, follow the procedures in STEP 3 on PAGE 9.
HEAVY! You may need assistance with this step.
Thank you for choosing SANUS!
Please take a moment to let us know how we did:
Legrand AV EMEA Headquarters Franklin strata 14
6003 DK Wert The Netherlands
- info@sanus.com
- US:1- 800-359-5520
- UK: 0800-056-2853
- SANUS.com
©2020 Legrand AV Inc. All rights reserved. SANUS is a division of Legrand. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. ©2020 Legrand AV Inc. All rights reserved. SANUS is a division of Legrand. SANUS and the SANUS logo are registered trademarks.
References
- HeightFinder | SANUS
- SANUS | #1 Brand of TV Wall Mounts in the U.S.
- HeightFinder | SANUS
- SANUS VLT7 | Tilting Wall Mounts | TV Mounts and Stands | Products | SANUS
- HeightFinder | SANUS
- HeightFinder | SANUS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>