BaByliss PRO BAB2665E MiraCurl Perfect Curling Machine Instruction Manual

BAB2665E MiraCurl Perfect Curling Machine
Instruction Manual

Please carefully read the safety instructions before using the appliance.
LpA (dB(A)): <70
MiraCurl™ the Perfect Curling Machine BAB2665E
Before you start using the BaBylissPRO® MiraCurl™ Perfect Curling Machine please take the time to read these instructions.

OPERATING FEATURES

Effortlessly create long-lasting beautiful curls, with the BaByliss MiraCurl™ Pro Perfect Curling Machine. Hair is automatically drawn into the ceramic curl chamber where it is softly held and heated from all directions to effortlessly form the curl. Then, simply release. The result is beautiful, free flowing curls.
FEATURES:

• Ceramic curl chamber for smooth curl creation
• 3 timer settings with audio beep indicator for different curl effects
• 3 heat settings; 190°C – 210°C – 230°C for long lasting results
• Powerful heating system ready to use in seconds with ultra-fast heat recovery
• Curl direction control for either a uniform or natural finish (Right/Left/Auto)
• Suitable for shorter and longer hair lengths
• On/off switch with on indicator light
• Heat ready indicator
• Sleep mode (after 20mn)
• Auto shut off (after 60mn)
• Salon length swivel cord (2.7m)

OPERATING INSTRUCTIONS

MiraCurl™ the Perfect Curling Machine will create many different curl effects in the hair. It is easy to experiment with the different settings to achieve the desired results.
Always ensure that the sections of hair you want to curl are no bigger than 3cm wide. The type of curl will depend on the temperature selected, and the timer setting which dictates the amount of time the hair is kept inside the curl chamber.
TEMPERATURE SETTINGS
There are 3 temperature settings to select from; 190°C, 210°C and 230°C. We recommend you always start with the lowest temperature setting and increase the level of heat as required.

• Setting I (190°C) – for delicate, fine or coloured hair
• Setting II (210°C) – for normal textured hair
• Setting III (230°C) – for thick or wavy hair

TIME SETTINGS
There are 3 timer settings with audio beep indicator. These different settings will give different curl effects. The longer the time the hair is held inside the curl chamber, the more defined the curl will be. But results will also vary according to hair type. Use the following as a guide.

• Setting 8 (8 seconds = 3 beeps) – for loose waves
• Setting 10 (10 seconds = 4 beeps) – for soft curls
• Setting 12 (12 seconds = 5 beeps) – for more defined curls

Audio off Setting
The automatic-beep indicator can be turned off if not required by sliding the timer switch to ”0”.
NOTE: When the ‘0’ setting is selected there will be no beep indicator to advise when to release the styler. Take extra care when using this setting.
CURL DIRECTION SETTING (Right/Left/Auto)
Use the Curl direction control to choose either a uniform or natural finish. Select the curl direction by sliding the switch to either left ”L” or right ”R”. When styling the left side of the hair, slide the curl direction switch to the left position – ”L”.
When styling the right side of the hair, slide the switch to the right position – ”R”. This ensures that the curl sits towards the face on both sides of the head and will give a more uniform style.
For a more natural look then select the auto setting ”A”. This will alternate the direction after each curl.

INSTRUCTIONS FOR USE

• Ensure hair is dry and combed through.

• Plug the styler into a suitable mains socket.

• Slide the temperature switch to the required heat setting.

• The styler is ready for use when the on indicator light has stopped flashing.

• There are 3 timer settings, choose the required setting for the hair type. Alternatively, switch the audio off to ”0”.

• Select the curl direction by sliding the control to either position ”L”, ”R” or ”A”

• Separate a section of hair that is no bigger than 3cm (Diagram A). Ensure that the section is clean, dry and combed through.

• Please note the styler must be positioned into the hair with the open part of the curl chamber facing towards the head. (Diagram B).

• Position the styler where you want the curl to start. The hair section must be straight, and placed neatly through the centre of the styler. (Diagram C & D).

• Once the hair is in place, let go of the hair section and close the handle to allow the hair to be automatically taken into the curl chamber. (Diagram E). NOTE: If you continue to hold the hair section after closing the handle then MiraCurl™ the Perfect Curling Machine will stop and beep to indicate that you must release the tension on the hair. If you have taken too much hair or hair is not neatly going through the centre of the appliance, MiraCurl™ the Perfect Curling Machine will again stop and beep to indicate a problem. This safety feature ensures that there will be no tangles.

• The hair is automatically drawn into the ceramic curl chamber where it is softly held and heated from all directions to effortlessly form the curl.

• If using the timer setting, the automatic beep indicator will start as soon as the handles are closed together. There will be a series of individual beeps. Hold the styler still with the handles closed together until the end of the individual beeps. There will then be four quick beeps in succession. This indicates that the time is up and you can remove the styler from the hair
  NOTE: When the audio off ”0” setting is selected there will be no beep indicator. There will just be a warning beep at 15 seconds.

• It is very important that you release the handles fully, and then gently pull the styler away from the head to free the hair and reveal the curl (Diagram F).
  NOTE: Always release the handles first to let the curl free; if you pull away before you open the handles, the curl will be straightened out.

• To allow the curl to set, do not comb or brush the hair until it cools.

• Repeat around the head until you have the amount of curls desired.

SLEEP MODE & AUTO SHUT OFF
This appliance has an automatic shut off feature for added safety. If the appliance is switched on for more than 60 minutes continuously, it will automatically switch off. If you wish to continue using the appliance after this time, simply slide the switch to the off position and then slide to the relevant setting to turn the power on.
The appliance also supports a sleep mode for energy saving: when unused after 20 minutes temperature will decrease to about 150°C. To return it to its former operating status simply close then release the handles and it will return to the temperature setting you were using and temperature will be ready within minute.

CLEANING & MAINTENANCE

The appliance may require cleaning due to a build-up of residue from hair products.

• Ensure the appliance is switched off, unplugged and cool.
• Using a damp cloth and mild detergent or soap, wipe the appliance.
• Ensure the appliance has dried thoroughly before re-using.

IMPORTANT: Do not immerse the appliance in water or other liquids. To help keep your styler in the best possible condition follow the steps below:

• Do not wrap the lead around the appliance; instead coil the lead loosely by the side of the appliance.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.

QUICK START

1. Ensure hair is clean, dry and combed through.

2. Separate a section of hair that is no bigger than 3cm.

3. IMPORTANT: Always hold the styler positioned into the hair with the open part of the curl chamber facing towards the head.

4. Position the styler where you want the curl to start. Ensure the hair section is held straight and placed neatly through the centre of the styler.

5. Close the handles together, let go of the hair and allow the hair to be automatically taken into the curl chamber. If using the timer setting, the beep indicator will start
   The amount of beeps you hear will vary depending on the time setting being used.
   Hold the handles  shut until you hear four quick beeps in succession to indicate the time is up.

6. Release the handles first to let the curl free and gently pull the styler away from the head.
   NOTE: If you pull away before you open the handles, the curl will be straightened out.

CLEANING & MAINTENANCE
It is very important that you use the cleaning tool included with your Perfect Curling Machine to regularly clean the curl chamber. This will prevent a build-up of product to ensure the curls produced are always perfectly formed.

• Ensure the appliance is switched off, unplugged and cool.
• Lightly damp the cleaning tool with warm water and mild detergent or soap.
• Insert the tool fully into the curl chamber cavity as per the diagrams below.
• Rotate the tool around the curl chamber to remove any build-up of product.
• Ensure the appliance has dried thoroughly before re-using.
• The cleaning tool can be used numerous times; just remove the felt pads, rinse them in warm, soapy water and leave to dry before using again.

BaBylissPRO®
Green Side Bât. 1B
400 avenue Roumanille – B.P. 20235
F – 06904 SOPHIA ANTIPOLIS cedex
FAC 2019/ 08

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>