HARBOR FREIGHT 59223-193175460530 50 FT LED String Work Light Owner’s Manual
- June 12, 2024
- HARBOR FREIGHT
Table of Contents
HARBOR FREIGHT 59223-193175460530 50 FT LED String Work Light Owner’s
Manual
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
WARNING
WARNING SYMBOLS AND DEFINITIONS
** This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this symbol to
avoid possible injury or death.
DANGER Indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE** Addresses practices not related to personal injury
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING: When using outdoor use portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:
- Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance’s plug.
- Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
- Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW.
- RISK OF ELECTRIC SHOCK: Do not use with an extension cord near water or where water may accumulate. Keep Work Lights at least 16 feet (5 m) from pools and spas. Keep plugs and receptacles dry.
- Suitable for wet location use.
- Do not operate the Work Light with a missing or damaged light containment barrier.
- Do not submerge the Work Light in water.
- Do not obstruct walkways or common areas with the cord.
- Wear ANSI-approved goggles during setup and use.
- Do not operate the Work Light in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. The Work Light generates sparks which may ignite the dust or fumes.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the Work Light. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- Maintain the Work Light. Check for breakage of parts and any other condition that may affect the Work Light’s operation. If damaged, have it repaired before use. Many accidents are caused by poorly maintained items.
- Maintain labels and nameplates on the Light. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
- Do not leave the Work Light unattended when it is plugged into an electrical outlet. Unplug it from its electrical outlet before leaving.
- This product is not a toy. Keep it out of reach of children.
- People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:
- Avoid operating alone.
- Properly maintain and inspect to avoid electrical shock.
- Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
- The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Specifications
Electrical Rating| 120 VAC / 60 Hz / 24 W per lamp (120 W per string) Max 1200
W total
---|---
Maximum number of String Lights that can be connected together| 9
Wire| SJTW 16/3
Installation
- Secure each light to mounting surface with included hook and loop straps.
- Secure cord between each light and power cord to mounting surface with cable ties (sold separately)
- Connecting Cords
To reduce the risk of the cord plugs pulling apart, do one of the following:
a. Make a knot as shown below, then connect the cords:
b. Or, use a plug-receptacle retaining strap or connector designed to hold extension cords ends together.
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual, including all text under subheadings therein before setup or use of this product.
- Plug String Work Light into a grounded 120 VAC GFCI electrical outlet.
- To prevent accidents, unplug String Work Lights after use.
Maintenance
**** Procedures not specifically explained in this manual must be performed only by a qualified technician.
WARNING
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unplug the Work Light from its electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM LIGHT FAILURE: Do not use damaged equipment. If damage is noted, have the problem corrected before further use
- BEFORE EACH USE , inspect the general condition of the Work Light. Check for:
- loose hardware,
- misalignment or binding of moving parts
- damaged cord/electrical wiring,
- cracked or broken parts, and
- any other condition that may affect its safe operation.
- AFTER USE , wipe external surfaces of the Work Light with a clean cloth.
WARNING! TO PREVENT SERIOUS INJURY: If the power cord of this light is damaged, it must be replaced only by a qualified service technician.
Record Product’s Serial Number Here:——————————-
Note: If product has no serial number, record month and year of purchase
instead.
Note: Replacement parts other than fuses are not available for this item.
Reference UPC 193175460530
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>