Woodpeckers Multi Router Machine Stand Instruction Manual
- June 16, 2024
- Woodpeckers
Table of Contents
Woodpeckers Multi Router Machine Stand
Product Information
Specifications:
- Legs: 4
- Short Top Stretcher: 2
- Long Top Stretcher: 2
- Short Bottom Stretcher: 2
- Long Bottom Stretcher: 2
- Carriage Bolt: 5/16-18×3/4 (32)
- Washer: 5/16 USS (32)
- Hex Nut: 5/16-18 (32)
- Hex Head Bolt: 1/2-13×2-1/2 (4)
- Washer: 1/2 USS Washer (8)
- Lockwasher: 1/2 (4)
- Hex Nut: 1/2-13 (4)
If you think you’re missing anything, email us at mailroom@woodpeck.com. You can also call us at 800-752-0725 from 9:00 a.m. to 5:00 p.m. EST Monday – Friday.
Product Usage Instructions
Step 1: Align the Legs and Stretchers
As shown in Figure A, align the Legs (A) and Stretchers (B, C, D, E). The Legs
will be on the outside of the assembly. The Short Stretchers overlap the Long
Stretchers on both the top and bottom sets.
Step 2: Install Carriage Bolts
From the outside, insert the 5/16-18 x 3/4 Carriage Bolts through all holes.
Place a 5/16 USS Washer and a 5/16-18 Hex Nut on each Carriage Bolt, but only
finger-tighten them. Refer to Figure B for clarification.
Step 3: Attach Multi-Router to the Machine Stand
Place the Multi-Router on the Machine Stand and secure it using the 1/2-13 x
2-1/2 Hex Head Bolts and USS Washer 1/2 from the top. On the underside, use a
USS Washer and a 1/2 Lock Washer, and secure it with a 1/2-13 Hex Nut. See
Figure C for reference.
Step 4: Adjust Legs and Tighten Joints
Adjust the Legs so that they are even and flat on the ground. Once aligned,
tighten the Nuts on all Leg/Stretcher joints to secure the assembly.
FAQ:
Q: Is this product safe to use?
A: Yes, this product is safe to use. However, please be aware that it contains
chromium, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, please visit
www.P65Warnings.ca.gov.
Parts List
- A. (4) Leg
- B. (2) Short Top Stretcher
- C. (2) Long Top Stretcher
- D. (2) Short Bottom Stretcher
- E. (2) Long Bottom Stretcher
HARDWARE BAG
- (32) Carriage Bolt 5/16″-18 × 3/4″
- (32) Washer 5/16″ USS
- (32) Hex Nut 5/16″-18
- (4) Hex Head Bolt 1/2″- 13 x 2-1/2″
- (8) Washer 1/2″ USS Washer
- (4) Lock Washer 1/2″
- (4) Hex Nut 1/2″-13
INSTALLATION
- Align the (A) Legs and (B, C, D, E) Stretchers as shown, the Legs will be on the outside of the assembly. The Short Stretchers overlap the Long Stretchers on both the top and bottom sets. Figure A.
- From the outside, install 5/16″-18 × 3/4″ Carriage Bolts through all holes. Place a 5/16″ USS Washer and a 5/16″-18 Hex Nut on each Carriage Bolt, finger tight only. Figure B.
- From the outside, install 5/16″-18 × 3/4″ Carriage Bolts through all holes. Place a 5/16″ USS Washer and 5/16″-18 Hex Nut on each Carriage Bolt, finger tight only. Figure B.
- Place the Multi-Router on the Machine Stand and from the top attach with the 1/2″-13 x 2-1/2″ Hex Head Bolts and USS Washer 1/2″. On the under-side, use a USS Washer and a 1/2″ Lock Washer, secure with 1/2″-13 Hex Nut. Figure C.
- Adjust Legs so that they are even and flat on the ground. Tighten the Nuts on all Leg/Stretcher joints.
Woodpeckers®
PRECISION WOODWORKING TOOLS
Woodpeckers, LLC Strongsville, Ohio • woodpeck.com.
© 2022 Woodpeckers. LLC.
WARNING!
This product can expose you to chemicals, including chromium, which is known
to the State of California to, cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warrings.ca.gov.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>