Westin Automotive Products Inc 28-32425 Outlaw Running Boards Instruction Manual
- June 13, 2024
- Westin Automotive Products Inc
Table of Contents
Westin Automotive Products Inc 28-32425 Outlaw Running Boards Instruction
ManuaL
INSTALLATION INSTRUCTIONS
CONTENT
ITEM| QUANTITY| DESCRIPTION| TOOLS NEEDED
1| 1| DRIVER OUTLAW RUNNING BOARD| 15MM SOCKET
2| 1| PASSENGER OUTLAW RUNNING BOARD| 16MM SOCKET
3| 1| FRONT DRIVER MOUNTING BRACKET| 16MM WRENCH
4| 1| FRONT PASSENGER MOUNTING BRACKET| RATCHET
5| 2| CENTER/REAR DRIVER MOUNTING BRACKET| TORQUE WRENCH
6| 2| CENTER/REAR PASSENGER MOUNTING BRACKET|
7| 12| M10 HEX HEAD BOLT|
8| 12| M10 FLAT WASHER|
9| 12| M10 SPLIT LOCK WASHER|
10| 12| M10 SERRATED FLANGE NUT|
11| 12| M10 SERRATED FLANGE HEX HEAD BOLT|
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO
PREVENT THREAD DAMAGE AND GALLING
PROCEDURE
-
Remove contents from box, verify if all parts listed are present and free from damage. Carefully read and understand all instructions before attempting installation. Failure to identify damage before installation could lead to a rejection of any claim.
-
Beginning on the driver side of the vehicle, remove (2) M10 OEM bolts (or plastic plugs) from each mounting location on the rocker panel if they are present. See Figure 1 for reference.
-
If any OEM mounting plates are present, remove them by removing the M10 bolt using a 15MM socket. See Figure 2 for reference. Note : Factory rock sliders must be removed in order to install this product.
-
Loosely install (1) Front Mounting Bracket (Item 3) to the rocker panel using the supplied M10 hardware as shown in Figure 3. Please refer to Figures 5 & 6 for bracket mounting orientation and locations.
-
Loosely install the Center/Rear Mounting Bracket(s) (Item 5) to the rocker panel using the supplied M10 hardware as shown in Figure 4. Please refer to Figures 5 & 6 for bracket mounting orientation and locations.
- Use the supplied serrated M10 Hardware to attach the Outlaw Running Boards (Items 1 & 2) to the previously installed mounting brackets (Items 3 & 4). See Figure 7 for reference.
- Repeat Steps 2 through 6 on the passenger side of the vehicle.
- Align and adjust the Outlaw Running Boards and mounting brackets as needed. Tighten and torque all hardware as specified: M10 to 35-38 ft-lbs
INSTALLATION COMPLETE
CARE INSTRUCTIONS
- REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
- STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
- GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER.
WARNING
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance
with the installation instructions and apply torque to the specifications as
defined. DOUBLE CHECK ALL FASTENERS BEFORE INITIAL USE, AND PERIODICALLY IN
THE FUTURE TO ENSURE PROPER FUNCTION AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is
defined as required, use caution when drilling a vehicle. FAILURE TO REVIEW AN
AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS
WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO AVOID
PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed
directly on the product. User should never exceed the vehicle manufacturers
maximum tow and weight rating regardless of the capacity of the hitch. FAILURE
TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN WARRANTY AND MAY RESULT IN
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer,
birth defects or other reproductive harm. For more info go to
www.p65warnings.ca.gov
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
P.N.: 75-2832425-RevA ECO #: W23-0017
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service 800-793-7846
www.westinautomotive.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>