B E G 10882 Mini-RC-Arc Extinction Kit Instruction Manual
- June 12, 2024
- B E G
Table of Contents
B E G 10882 Mini-RC-Arc Extinction Kit
Safety instructions
- Work on the mains supply may only be carried out by qualified professionals or by instructed persons under the direction and supervision of qualified skilled electrical personnel in accordance with electrotechnical regulations
- Disconnect the supply before installing!
- Read this supplementary sheet before putting the device into operation. Knowledge of this document is part of the intended use!
Operation
The snubber provides suppression of interferences for your lighting installation if needed. It is important to install the snubber near the source of interference.
Wiring diagram
Technical data
- 50 x 22 x 10 mm Dimensions
- -25°C – +50°C Ambient temperature
- 15 cm Cable length
- 470 nF Capacitor
- 2 x 330 Ω Resistor
For further information please visit the B.E.G. website.
B.E.G. Brück Electronic GmbH | Gerberstr. 33 | 51789 Lindlar | GERMANY | Phone: +49 (0) 2266 90121-0 | Fax:+49 (0) 2266 90121-50 | info@beg.de | beg-luxomat.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>