iDEAL 42 SpliceLine In-Line Wire Connector Starter Kit Installation Guide
- June 12, 2024
- IDEAL
Table of Contents
iDEAL 42 SpliceLine In-Line Wire Connector Starter Kit
Product Information
- Product Name : SpliceLine Wire Connectors
- Model : 42
- Color : Orange
- Wire Range: Solid: 0.5mm2 – 4.0mm2, Stranded: 1.0mm2 – 2.5mm2 (Stranded wire is limited to 7 strands)
- Manufacturer Website : www.idealind.com
Product Usage Instructions
To install the SpliceLine Wire Connector:
- Strip the wire insulation to a length of 13mm.
- Insert the stripped end of the wire into the connector.
- Ensure that the wire is fully inserted and secure.
To remove the SpliceLine Wire Connector :
Gently pull the wire from the connector.
To test the connection:
Perform necessary testing procedures to ensure a secure and reliable
connection.
Note: The SpliceLine Wire Connector Model 42 is suitable for use with solid wires ranging from 0.5mm2 to 4.0mm2 and stranded wires ranging from 1.0mm2 to 2.5mm2 (limited to 7 strands).
Installation Instructions
SpliceLine Wire Connectors
Model 42
- Do not exceed the rating of these connectors.
- Turn OFF power before removing or installing connectors.
- Wiring must comply with all applicable electrical regulations.
- COPPER TO COPPER ONLY. Do not use on aluminium wire.
- Incorrect use of these connectors can cause electrical fires, personal injury or death.
- These connectors are suitable for solid and semi-rigid (<7 strands) conductors. They are not suitable or rated for use with flexible cable with >7 strands.
- Strip wires back 13mm.
- Grip wire firmly and push conductor into open port.
- Use only one conductor per port.
- Connectors are reusable on solid wires of the same wire gauge or larger. If reusing connectors, cut and re-strip conductors
- In order to remove a wire, pull and twist the wire back and forth.
- DO NOT RE-USE connector on stranded wire.
| Model | Colour | Rating | Wire Range |
|---|
42
| ****
Orange
| ****
32A / 450V /105°C
| Solid: 0.5mm2 – 4.0mm2 Stranded*: 1.0mm2 – 2.5mm2
- Stranded wire is limited to ≤ 7 strands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>