Imou ZR1 Wireless Sound and Flash Alarm Siren User Manual
- June 12, 2024
- imou
Table of Contents
Imou ZR1 Wireless Sound and Flash Alarm Siren
Packing List
Check if the product is in good condition. Make sure it contains the below accessories.
- 1X Alarm Siren
- 1X power adapter
- 1X Wireless Sound&Flash Alarm Siren User Manual
- 1X User Manual
- 1X 3M sticker
- Qualification Certificate
- 1X QCPASSED Label
- 2X Expansion tubes, 2X screws
Appearance and Components
- Buzzer
- LED indicator (red ring)
- Volume buttons
- Anti-tamper switch
- OFF/ON button
- Power input
Product Features
- Sound & flash alarm for 100dB.
- Low voltage monitoring and indication function.
- Periodically sends online reports to the gateway.
- Anti-tamper design.
- Wireless transmission, easy to install.
- ABS material housing is radiation-resistant and heat-resistant.
Power-On and External Power Supply
- The first time powered on, the LED is on for 3 seconds.
- When the battery is powered, press the OFF/ON button for more than 3 seconds to turn OFF/ON.
- Network setting/exit setting: press both volume+ and volume- buttons at the same time for more than 5 seconds.
Note: When receiving an alarm signal from the gateway, the status indicator will flash, and the buzzer beeps. To clear the alarm, please operate on App.
Basic Functions
Installation Position and Precautions
- Install the product on an indoor tile, gypsum wall, or painted wood.
- Building materials, such as reinforced concrete, will shorten the wireless communication distance.
**Product Installation
**
Add the siren to the gateway as an accessory based on the gateway user manual.
- Rotate the mounting base counterclockwise to remove it from the product.
- Power on the product.
Use an expansion tube and screws or a 3M sticker to fix the mounting base on a wall. Rotate the product clockwise into the mounting base. If you use a 3M sticker, ensure that the installation surface is smooth and stable. Clean the surface before mounting to prevent the product from falling off.
Technical Parameters
- Wireless Technology
- Working Voltage
- Transmission Frequency
- Working Temperature
- Built-in Battery
- Standby Time
- Relative Humidity
- Dimensions
Please refer to the user manual for further details and instructions
Packing List
Check if the productis in good condition. Make sure it contains the below
accessorles.
Appearance and Components
Product appearance
Product Features
- Sound&flash alarm for 100 dB.
- Low voltage monitoring and indication function.
- Periodically sends online reports to the gateway.
- Anti-tamper design.
- Wireless transmission, easy to install.
- ABS material housing, radiation-resistant and heat-resistant.
Power-On and External Power Supply
- The first time powered on, the LED is on for 3s.
- When the battery power, press the OFF/ON button for more than 3s to turn OFF/ON.
- Network setting/exit setting: press both volume + and volume- at the same time for more than 5s.
Basic Functions
- Network setting: press the volume + and volume-buttons at the same ti me, the red light will be on for 5s- Release the button to set network, LED flashes for networksetting. LED is always on for 3s then off. If failed, the LED will be off directly.
- Volume adjustment: When the siren alarms, press the volume + and – to adjust.
- Anti-tamper switch. When siren is removed, siren will alarm. To cancel the alarm, please press anti-tamper switch for 3 times, or operate on App
- LED Indicator
Power on/off: LED ison for 3S, buzzer beeps twice.
Low voltage:LED flashes every 20s.
Network setting: LED flashes.
Power off: Buzzer beeps once.
Network timeout: LED changes from flash to off.
Network setting success: LED is on for 3 seconds and off.
Installation Position and Precautions
- Install the product on an indoor tile, gypsum wall, or painted wood.
- Building materials, such as reinforced concrete, will shorten the wireless communication distance.
Product Installation
Add the siren to the gateway as an accessory based on the gateway user manual.
- Rotate the mounting base counterclockwise to remove it from the product.
- Power on the product.
- Use expansion tube and screws or a 3M sticker to fix the mounting base on a wall. Rotate the product clockwise into the mounting base. Ifyou use a 3M sticker, ensure that the installation surface is smooth and stable. Clean the surface before mounting to prevent the product from fallingoff.
- Connect the siren to the power adapter.
Technical Parameters
Toxic or Hazardous Substances or Elements of this Product
Warranty Certificate
Warranty policy:
- . Ifthe product has quality problems within 7 days of the payment date, you can apply for a refund based on the invoice price or to replace with the same model or have it repaired.
- Ifthe product has quality problems within 15 days of the payment date, you can apply to replace the product with he same model or have it repaired.
- Ifthe product has quality problems within 12 months of the payment date, you can apply to have it repaired.
What is not covered under this warranty:
- The product owner has no warranty certificate orthe warranty service has expi red.
- Damage caused by improper use, maintenance, or storage
- Damage caused by disassem bly and repair without Tuya’s authorization
- Damage caused by force majeure 5. Normal discoloration and depreciation after the product has been used
User Form
User information (Specify real information. Tuya promises to use the information only for after-sales services.)
Vendor Form
User information (Specify real information. Tuya promises to use the
information only for after-sales services.)