Imou ZG1 Zigbee Gateway User Guide
- June 12, 2024
- imou
Table of Contents
ZG1 Zigbee Gateway
User Guide
Package Contents
Gateway ×1| Power Adapter ×1| USB Cable ×1| Screw and Anchor Pack ×1
Overview
Device Setup
Step 1 Get Imou Life App
Scan the QR code below or search for “Imou Life” in the app store to download
and install the app.
http://mobile.easy4ipcloud.com/imou/detect.html
If you already use the app, make sure that you are using the latest version.
Step 2 Set Up the Device
Pairing Setup
Method 1 Wired Pairing
Connect the device to the power supply socket and then connect it to a network
cable.
Method 2 Soft AP Pairing
Press the function button on the front of the device until the LED flashes
blue fast.
LED Indicator Patterns
| LED Indicator | Device Status |
|---|---|
| Flashing red fast | Alarm/malfunction |
| Flashing red | Offline |
| Solid red | Powering on |
| Flashing blue fast (2 times/s) | Pairing sensors |
| Flashing blue (1 time/s) | Start pairing setup |
| Solid blue | Paired and normal |
Additional Information
Troubleshooting
Q: What can I do if I fail to pair the device?
Please make sure that you have entered the correct Wi-Fi password. The signal of Wi-Fi is strong. The device is connected to a 2.4 GHz Wi-Fi. Check your router whether it is working properly. You can set the router to 802.11 b/g mode.
Q: Why am I not receiving push notications from Imou Life app?
The reasons might be: Your devices have yet to be setup or the sensors have not been enabled. Your devices are offline. The devices battery ran low.
Q: How can I reset the device?
Power on the device and use a pin to press and hold the reset button for 5 s and release until your hear beep once. Reset is done when the LED indicator flashes red.
V1.0.0
Documents / Resources
| Imou
ZG1 Zigbee
Gateway
[pdf] User Guide
ZG1 Zigbee Gateway, ZG1, Zigbee Gateway, Gateway
---|---