IMOU ZS2 Smart Smoke Alarm User Guide
- June 12, 2024
- imou
Table of Contents
Smart Smoke Alarm
Quick Start Guide
V1.0.0
Package Contents
Overview
Pairing Setup
- Twist the mounting base anticlockwise to remove it.
- Pull out the battery insulation film.
- Hold down the button for 5 s.
Installation
Before the installation, please set up your device and test its signal.
Method 1 Using Screws (Recommended)
Step 1 Use the mounting bracket to mark the screw holes.
Step 2 Drill holes with an appropriately-sized drill and insert the anchors to
fix the mounting bracket.
Step 3 Attach the device to the mounting bracket and turn clockwise to lock
it.
Method 2 Using a 3M Sticker
Step 1 Peel off the 3M sticker and stick it to the rear of the device.
Step 2 Affix the device to where you want to install.
- If you choose to use a 3M sticker, affix the device to a smooth, flat, dry, and clean surface.
- Regularly check whether the device is attached to the surface securely to keep it from falling down.
Additional Information
Routine Maintenance and Protection
The product has a maintenance-free design. You only need to perform the
following routine operations to ensure that the product works properly.
- Suggest to test the product at least once every week. For details on how to test the product, see “Alarm and Test”.
- Keep the product clean and remove dust from it with a vacuum cleaner and soft brush at least once every year.
How to React When You Hear Smoke Detection
When the smoke is detected, the device immediately sends alarm.
- If there is a fire, call the fire department immediately and use a fire extinguisher to put out the fire.
- If there is no fire, press the button to mute the device.
- The device will send a fire alarm in the following situations:
- Mist sprayed from pesticides or cosmetics.
- Cigarettes and incense sticks generate smoke.
- Cooking smoke or steam.
- Pesticides that is thermal evaporation or smoke-like.
LED Indicator and Buzzer
| LED Indicator | Audible Alarm | Device Status |
|---|---|---|
| Flashing red | Quick beeps | Alarm |
| Flashing red every 50 s | None | Normal |
| Flashing red | 4 beeps | Self-checking |
| Quick flashing green | None | Pairing mode |
| Flashing yellow every 40 s | 1 short beep | Low battery |
Troubleshooting
Q: What do I do if the device malfunctions?
Q: What do I do If the product does not respond?
Check whether the product is correctly mounted to the mounting bracket.
Q: Why does the device intermittently beeps at about 40s interval?
Check whether the battery level is low. Replace the battery within one week.
Q: Why does the device often sends alarm when there is no fire?
Please try to relocate your device.
Specifications
- Wireless technology: Zigbee
- Transmission frequency: 2.4 GHz
- Working voltage: 3 VDC (CR123A battery)
- Low battery alarm: Supported
- Operating temperature: -14°F to +131°F (-10°C to +55°C )
- Alarm method: Buzzer, LED indicator and App alert
- Alarm loudness: ≥ 85 dB (calculated 3 m in front of the device)
- Installation methods: Ceiling mount
- Battery lifespan: More than 3 years (20 times/day)
- Zigbee: 2405-2480MHz; 19dBm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>