ETHAN ALLEN 096079 Clara Crystal Table Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 096079 Clara Crystal Table Lamp
Product Information
The Clara Bud Table Lamp is a stylish and functional lamp that adds a touch of elegance to any room. This lamp does not come with a light bulb, except in cases where it is required by the State of California Title 20. It includes several parts for assembly, including a finial, shade, harp, lamp socket, and a plastic cap for the electric plug.
Parts Included
- A. Finial
- B. Shade
- C. Harp
- D. Lamp Socket
- E. Saddle
- F. Plastic Cap for electric plug
Assembly Instructions
- Use care when unpacking and ensure that all parts are included before disposing of packaging materials.
- No tools are required for assembly.
- Insert the Harp (C) into the Saddle (E) and lower the harp caps until they cover the two-pronged Saddle (E).
- Install the Shade (B) over the assembled Harp (C).
- Screw the Finial (A) into the Harp (C).
- Install the bulb into the Lamp Socket (D).
- Remove the Plug Cap (F) from the electric plug.
Product Usage Instructions
To care for and clean your lamp:
- Wipe the lamp with a soft dry cloth.
- Avoid using cleaners or scouring pads.
- Before changing the bulb, unplug the lamp and allow the bulb to cool.
Troubleshooting
If you encounter a problem where the bulb does not light, follow these steps:
Possible cause: Bulb is burnt out or damaged
- Replace the bulb.
Possible cause: The power to lamp is off
- Confirm that the power is on.
Possible cause: Lamp is not plugged in
- Confirm that the lamp is plugged in.
If the light fixture still does not work after troubleshooting, please contact
your local Ethan Allen Design Center for further assistance.
Remember to save these instructions for future reference.