ETHAN ALLEN 09-6087 Turnbull Table Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 09-6087 Turnbull Table Lamp
Product Information
- Product Name: Turnbull Table Lamp
- Model Numbers: 09-6087 (Black), 09-6088 (White)
- Usage: Indoor use only
- Plug Type: Polarized plug with one wider blade
- Bulb Wattage: Follow recommended bulb wattage, do not exceed
- Bulb Type: Use only the specified type of bulb
- Safety Precautions:
- Keep flammable materials away from the bulb
- Do not open the product or alter the wiring
- Follow the precautions provided with the power cord extension
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
- This lighting fixture is for indoor use only.
- This lamp is equipped with a polarized plug.
- One plug blade is wider than the other.
- DO NOT MODIFY the plug or power cord in any way.
- DO NOT EXCEED the recommended bulb wattage.
- Use only the type of bulb specified. Keep flammable materials away from the bulb.
- DO NOT OPEN the product or alter the wiring in any manner.
- Extension cord: Follow the precautions provided with the power cord.
Product Usage Instructions
Unpacking
- Handle packaging materials with care
- Locate and ensure all parts are included before disposing of packaging materials
Assembly
Tools Required For Assembly: None
Light bulb is not included.
Parts Included
- A. Shade Finial
- B. Shade
- C. Harp (Harp styles may vary)
- D. Lamp Socket (attached, no assembly required)
- E. Lamp Base
Assembly Procedure
- Install Harp Part (C) onto Lamp Base Part (E)
- Install Shade Part (B) onto Harp Part (C)
- Install Shade Finial Part (A) onto Harp Part (C)
- Install Bulb into Lamp Socket Part (D)
- Remove Plug Cap from Plug
Caring for and Cleaning your lamp
- To clean, wipe with a soft dry cloth
- Do not use cleaners, scouring pads, etc.
- Unplug lamp and allow the bulb to cool before changing it
Troubleshooting
- Problem: Bulb does not light
- Possible cause: Bulb is burnt out or damaged, Power to lamp is off
- Correct by: Replace bulb, Confirm power is on
- Problem: Lamp is not plugged in
- Correct by: Confirm lamp is plugged in In the event that the lighting fixture does not work after troubleshooting, contact your local Ethan Allen Design Center.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>