WINGBO WBWL-RM26-WH 7.5 Inch 1 Light Gold Wood Beaded Wall Sconces Instruction Manual
- June 12, 2024
- WINGBO
Table of Contents
WINGBO WBWL-RM26-WH 7.5 Inch 1 Light Gold Wood Beaded Wall Sconces
Product Information
The Wall Lamp is a lighting fixture designed to be mounted on a wall. It is suitable for indoor use and requires electrical connections to operate. The lamp is compatible with E12 Socket light bulbs with a maximum wattage of 40 Watts (light bulb not included).
Warning:
Please read and follow the assembly instructions carefully to ensure safe
installation and usage of the Wall Lamp.
Product Usage Instructions
- Ensure the power supply is turned off before starting the installation process.
- Locate an appropriate outlet box on the wall where you wish to mount the lamp.
- Using the provided mounting screws, install the mounting bracket securely onto the outlet box.
- Make electrical connections by connecting the wires from the lamp to the corresponding wires in the outlet box. Use wire nuts to secure the connections, ensuring proper insulation.
- Attach the canopy onto the mounting bracket using screws and canopy nuts, ensuring it is securely fastened.
- Hang the strands and pendant on the lamp as desired. Ensure they are properly aligned and do not obstruct the light bulb area.
- Insert a compatible E12 Socket light bulb into the lamp. Ensure that the wattage of the light bulb does not exceed 40 Watts.
- Before turning on the power, double-check all connections and make sure they are secure.
- Turn on the power supply and test the functionality of the Wall Lamp.
Note:
To maintain safety and prevent fire hazards, never exceed the recommended lamp
wattage. If the Wall Lamp is not functioning properly, consult a qualified
electrician or contact our customer support for assistance.
WARNINGS
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- Check for electric, gas, & plumbing lines before drilling or consult a professional.
- Turn off your electricity at the circuit breaker or main fuse box before installation.
- Do not restore power to the line until fully installed.
- Do not exceed the recommended wattage.
- Always allow bulbs to cool for 10 minutes before changing.
ASSEMBLY
- Install mounting bracket② on outlet box using mounting screws③.
- Make electrical connections using wire nuts④.
- Secure the canopy on the mounting bracket② with screws① and canopy nuts.
- Hang the strands⑦ and pendant⑧ on the lamp.
- Install light bulb (not included).
This fixture has been rated for up to one E12 Socket 40-Watt maximum light
bulb (not included). To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED
LAMP WATTAGE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>