WINGBO WBFL-Y009-BK Industrial Wire Cage Standing Lights LED Trinity 3 Arc Floor Lamp Instruction Manual
- October 30, 2023
- WINGBO
Table of Contents
WINGBO WBFL-Y009-BK Industrial Wire Cage Standing Lights LED Trinity 3
Arc Floor Lamp
Product Information
- The product is a lamp that requires the assembly of the base and bulb (not included).
- The lamp is suitable for indoor use only.
- The lamp uses 110-120V 60Hz with a maximum of 60 watts and requires an E26 bulb.
- The lamp should not be used in the bathroom or damp places.
- The lamp should be placed on a flat surface and away from any flammable materials.
- The lamp should be switched off before cleaning.
- The plug should be removed from the outlet and the lamp should be cooled down before replacing the bulb.
- Do not pull the plug out of the outlet with wet hands.
- If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced by the manufacturer or a similarly qualified person to avoid any hazards.
Product Usage Instructions
- Assemble the base and the bulb (not included) as per the diagram provided.
- Ensure that the lamp is placed on a flat surface and away from any flammable materials.
- The lamp should be used indoors only and not in the bathroom or damp places.
- Before cleaning the lamp, ensure that it is switched off.
- When replacing the bulb, ensure that the plug has been removed from the outlet and the lamp has cooled down.
- Do not pull the plug out of the outlet with wet hands.
- If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced by the manufacturer or a similarly qualified person to avoid any hazards.
- Keep the lamp out of reach of children and animals.
ASSEMBLY INSTRUCTIONS
- Assemble the base and the bulb (not included) as per the diagram.
CAUTION
- For indoor use only.
- Keep out of reach of children and animals.
- Use 110-120V～60Hz only, use MAX 60 watts, E26 bulb.
- Do not use in the bathroom or damp places.
- Place the lamp on a flat surface and ensure there are no flammable materials around it.
- Before cleaning the lamp, ensure it is switched off.
- Before replacing the bulb, ensure the plug has been put out from the outlet and the lamp has been cooled down.
- Do not pull the plug out of the outlet with wet hands.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>