WINGBO WBCF-BS33-BK Black Indoor Flush Mount DC Ceiling Fan with Integrated LED Lights Instruction Manual

WINGBO WBCF-BS33-BK Black Indoor Flush Mount DC Ceiling Fan with

Integrated LED Lights

Precautions

Before using this ceiling fan with light, please read this manual carefully and operate strictly in accordance with the procedures.

1. The input voltage of this product: 120V/60Hz
2. If you have insufficient knowledge of electrical appliances, be sure to hire an experienced expert to install them.
3. Before installing and disassembling the ceiling fan light, please turn off the power first. The installation must be installed in the order of ground wire, live wire, and neutral wire. Before disassembly, it must be disassembled in the order of neutral wire, live wire, and ground wire to avoid electric shock.
4. The ceiling fan must be installed on a solid ceiling, and the location of the ceiling fan must be able to withstand a gravity greater than 60 KG.
5. When installing the ceiling fan, all screws must be securely locked.
6. When the ceiling fan is rotating, no objects should touch the blades to avoid danger.
7. The angle and elevation of the leaf frame are determined after many repeated measurements, so it cannot be changed at will. When installing the leaf frame and blades, special care should be taken not to force collisions. If the angle and elevation angle of the leaf frame are deformed that will cause the ceiling fan to shake.

Prepare tools before installation

Basic parameters

1. Voltage: 120V/60Hz
2. Power: Motor power: 42W LED power: 24W
3. Speed + Color change: 6speed+3 color temperatures(Cool white light 6500K+warm light 3000K+ neutral light 4500K)
4. Number of rotating leaves: 4 blades
5. Fan blade material: Plywood
6. Motor Material: Pure copper wire winding and high-quality silicon steel stator, high efficiency, super quiet, energy saving.
7. Control method: Remote control
8. Diameter: 52inch
9. Reversible： YES

Installation steps and instructions

Ceiling Fan Kit
Before the ceiling fan is installed, there are the following accessories in the carton, please check them one by one, if there is no shortage, you can install them.

Installation Procedures

Secure the ceiling plate
First remove the Ceiling plate from the fan motor, (Figure 1), there are two different kinds of screws to fix the plate, one works for concrete ceiling, and the other work for the wood ceiling (Figure 2), choose the right screws to fix the ceiling fan(Figure 3&4)

TIPS: Use different screws to secure the ceiling plate according to the different materials of the ceiling, please do not install the ceiling plate on the ceiling which is unable to bear 60KG to prevent any potential danger. After the ceiling plate is located, make sure it can withstand more than 60KG,try to pull by hand to test if the ceiling is strong enough for safety.

• Install the hanger bracket to the outlet box
• Take off the screws on the outlet box.
• Install the hanger bracket to the outlet box by screws

WARNING: To reduce the risk of fire, electric shock, or personal injury mount to an outlet box marked “Acceptable for Fan Support”. Use the mounting screws provided with the outlet box . Most outlet boxes commonly used for supporting lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

Install the fan motor

• Connect the fan controller
• Hang the fan motor with a steel cable on the hooking of the ceiling plate (Figure 5)
• Wiring method of remote control receiver: (Figure 6)
• Connected the neutral wire from the ceiling to the receiver white wire (AC IN N)
• Connected the live wire from the ceiling to the receiver black wire (AC IN L).
• Connected the yellow Motor W)from the motor to the yellow wire (Motor W) from the receiver.
• Connected the red wire (Motor V) from the motor to the red wire (Motor V from the receiver.
• Connected the Grey wire(Motor U)from the motor to the Grey wire (Motor U) from the receiver.

ATTENTION
Make sure the power is off when you are connected to these wiring for safety, and make sure every wiring is connected to the right place.

• Connected the blue wire (FOR LIGHT) from the motor to the blue wire (FOR LIGHT) from the receiver.
• Connected the white wire(FOR LIGHT) from the motor to the white wire (FOR LIGHT) from the receiver.
• Match the two keyholes of the fan motor to the two fixing screws of the ceiling plate, and then turn the motor clockwise on the ceiling plate (Figure 7)
• Align the two fixing screws of the fan motor that have just been twisted to the holes, then tighten them, and tighten the remaining fixing screws in turn (Figure 8)

Install fan blades

• Take off the screws on the blade arms, and save the screws for the next step.(Figure.9)
• Tighten the fan blades into the blade arms. make sure every screw are fixed tightly for safety. (Figure.10)

Ceiling Fan Troubleshooting Solutions & Common Problems

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>