ETHAN ALLEN 096046 Karter Cylinder Table Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 096046 Karter Cylinder Table Lamp
Product Information
Product Name: 096046 KARTER TABLE LAMP
Product Type: Table Lamp
Usage: Indoor use only
Plug Type: Polarized plug with one wider blade
Bulb Wattage: Recommended wattage only
Product Usage Instructions
Assembly Instructions
- Unpack all parts from the carton.
- Pull excess cord through the ceramic lamp body (D).
- Put Harp (C) onto the glass lamp body (D).
- Place Shade (B) onto Harp (C) and secure with Finial (A).
Caring for and Cleaning your lamp
- To clean, wipe with a soft dry cloth.
- DO NOT USE cleaners, scouring pads, etc.
- Unplug lamp and allow bulb to cool before changing the bulb.
Troubleshooting
| Problem | Possible Cause | Correct by |
|---|---|---|
| Bulb does not light | Bulb is burnt out or damaged | Replace bulb |
| Power to lamp is off | Confirm power is on | |
| Lamp is not plugged in | Confirm lamp is plugged in |
In the event that the lighting fixture does not work after troubleshooting, contact your local Ethan Allen Design Center.
ASSEMBLY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK,AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOTEXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from bulb. DO NOT
OPEN the product or alter the wiring in any manner. Extension cord: Follow
precautions provide with power cord.
UNPACKING
Use care when unpacking.Locate ALL PARTS INCLUDED before disposing of packing materials.
ASSEMBLY,CARE,AND TROUBLESHOOTING
Tools Required For Assembly:Tools are not required.
Required:Light bulb is not included.
Parts Included
Refer to Figure1.
- A. Shade Finial.
- B. Shade.
- C. Harp.
- D. Lamp base
Assembly Procedure
Refer to Figure1.
- Unpack all parts from carton carefully.
- Pull excess cord through the ceramic lamp body (D).
- Put Harp (C) onto the glass lamp body (D).
- Place Shade (B) onto Harp (C) and secure with Finial (A).
Caring for and Cleaning your lamp:
- To clean, wipe with soft dry cloth
- DO NOT USE cleaners, scouring pads, etc.
- Unplug lamp and allow bulb to cool before changing bulb.
Troubleshooting
| Problem: | Possible cause: | Correct by: |
|---|---|---|
| Bulb does not light | Bulb is burnt out or |
damage
| ****
Replace bulb
Power to lamp is off| Confirm power is on
Lamp is not plugged
in
| Confirm lamp is
plugged in
In the event that the lighting fixture does not work after
Troubleshooting, contact your local Ethan Allen Design Center.