ETHAN ALLEN 096011_CLR Jayce Acrylic Table Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 096011_CLR Jayce Acrylic Table Lamp
Product Information
The Jayce Table Lamp is a stylish and functional lighting solution for your home. It comes with all the necessary parts for assembly and is designed with user safety in mind. The lamp does not include a light bulb.
Parts Included:
- A. Finial
- B. Shade (may be packed in separate carton)
- C. Harp
- D. Socket and Saddle
- E. Plug Cap
Caring For and Cleaning Your Lamp:
- Wipe the lamp with a soft, dry cloth.
- Avoid using cleaners or scouring pads, as they may damage the lamp’s finish.
- Before changing the bulb, unplug the lamp and allow the bulb to cool first.
Troubleshooting:
| Problem | Possible Cause | Correction |
|---|---|---|
| Bulb does not light | Bulb is burnt or damaged | Replace the bulb |
| Bulb does not light | Power to lamp is off | Confirm that power is on |
| Bulb does not light | Lamp is not plugged in | Confirm that the lamp is plugged |
in
If the lamp still does not work after troubleshooting, please contact your local Ethan Allen Design Center for further assistance.
Please save these instructions for future reference.
Product Usage Instructions
- Unpack the lamp carefully and locate all the included parts before disposing of the packaging materials.
- Remove the silica gel packet from the socket before plugging the lamp into an outlet.
- Assembling the lamp:
- Install the Harp (C) onto the Saddle (D).
- Install the Shade (B) onto the Harp (C).
- Install the Finial (A) onto the Harp (C).
- Install the bulb onto the Socket (D).
- Remove the Plug Cap (E).
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from the bulb. DO
NOT OPEN the product or alter the wiring in any manner. If using an extension
cord, follow precautions provided with the power cord.
Use care when unpacking. Locate ALL THE PARTS INCLUDED before disposing of packaging materials. Remove the silica gel packet from the socket before plugging the lamp in an outlet.
ASSEMBLY, CARE, AND TROUBLESHOOTING
- No tools required for assembly
- Light bulb is not included
Parts Included
(Refer to Figure on the Right)
- A. Finial
- B. Shade (may be packed in separate carton)
- C. Harp
- D. Socket and Saddle
- E. Plug Cap
Assembly Procedure
(Refer to Figure on the Right)
- Install the Harp (C) onto the Saddle (D)
- Install the Shade (B) onto the Harp (C)
- Install the Finial (A) onto the Harp (C)
- Install the bulb onto the Socket (D)
- Remove the Plug Cap (E)
Caring For and Cleaning Your Lamp:
- Wipe with a soft, dry cloth.
- Avoid cleaners, scouring pads, etc., as these may cause damage to the lamp finish.
- Before changing the bulb, unplug lamp and allow the bulb to cool first.
Troubleshooting
| Problem: | Possible cause: | Correction: |
|---|---|---|
| Bulb does not light | Bulb is burnt or damaged | Replace bulb |
| Power to lamp is off | Confirm power is on | |
| Lamp is not plugged in | Confirm lamp is plugged in |
If the fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>