Voltas OBDeleven Car Diagnostics Pro App User Guide
- June 12, 2024
- Voltas
Table of Contents
Quick start guide
Download & install OBDeleven application
Application can be downloaded from Google Play store LINK
https://play.google.com/store/apps/details?id=com.voltasit.obdeleven
OBDeleven Bluetooth Scan Tool for Android
This is a unique Bluetooth device which allows you to run full system
diagnostics，programming and monitoring on your vehicle. It connects to the
vehicle using the OBD-II diagnostic socket found underneath the steering
wheel. The app that accompanies this scan tool is available on the Google Play
Store and supports devices running Android 4. 1 or later and an active
internet connection is required.
Voltage: 9 – 16 V
Current: 45mA
Connection: Bluetooth (up to 10 meters)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accor
dance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or televisi on reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
int erference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Create account
Connect with Facebook, Twitter or sign up with email by pressing on icons in top of the screen.
Plug device into car OBD2 connector
OBD2 connector is usually found on the driver’s side, under the steering wheel.
Turn ignition on or start engine
Tap connect
For faster connection pair device via Bluetooth settings.
Pairing code: 1234
Create device password
Secure your car from unauthorized access by creating device password.
Activate PRO version
If you have PRO version activation code enter it by going to Settings and activating PRO theme.
You are ready to use OBDeleven
More help can be found in our wiki page: LINK
Created by Voltas IT LLC
Documents / Resources
|
Voltas OBDeleven Car Diagnostics Pro
App
[pdf] User Guide
2AVJ4-OBDELEVEN, 2AVJ4OBDELEVEN, OBDeleven Car Diagnostics Pro App, Car
Diagnostics Pro App, App
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>