AGFAPHOTO PPS 600Pro Powerstation Charges User Manual

PPS 600Pro Powerstation Charges
User Manual

SET INCLUDES

INTRODUCTION

Congratulations on purchasing the “AgfaPhoto PPS 600Pro”. With 644 Wh of stored energy, you can supply electronic devices with power anytime and anywhere, be it when  camping, at an outdoor photo shoot, in your motorhome, in the event of an emergency or a power failure.
Note the following points while reading through this instruction manual:

• This manual was prepared with care and to the best of our knowledge.
  Contact us should you have any questions relating to the product.

• This manual may not be copied or duplicated, except for personal use.

Disclaimer

• our company cannot be held liable for damages caused by fire, earthquake, use by a third party, other accidents, intentional misconduct on the part of the customer,  abuse or other abnormal conditions.
• Do not repair any damage to the AC plug or power supply on your own.
• The warranty covers all terms and conditions of the warranty. Contents that are not specified in the warranty terms and conditions are beyond our responsibility.
• our company assumes no liability for damages caused by incorrect use or non-compliance with this instruction manual.
• This instruction manual, as well as other language versions can be downloaded as a PDF file on our website: www.portable-power-stations.com.
• Intended use: The AgfaPhoto PPS 600Pro unit is intended as a power supply for electronic devices with a maximum power consumption of 650 W continuous,  1.000 W peak. our product is not suitable to be used with equipment that relates to one‘s own personal safety or which relies heavily on electricity, such as medical devices,  equipment for nuclear facilities, the manufacture of air  and spacecraft, etc.
  We therefore assume no liability for accidents involving personal  safety, fires or machine failures caused by using our product with the aforementioned devices.

SAFETY INSTRUCTIONS

observe these instructions to ensure safe usage.
Explanation of symbols

This symbol together with DANGER means| Noncompliance may very likely lead to serious injury or death.
---|---
This symbol together with WARNING means| Noncompliance may lead to serious injury or death.
This symbol together with CAUTION means| Noncompliance may lead to injuries and/or property damage.
This symbol together with ATTENTION means| Noncompliance may damage the unit.

• Serious injuries include blindness, burns, electric shock, fractures, poisoning, etc., which can lead to complications, hospitalization or permanent treatment.
• Injuries include burns, electric shock, etc., which do not lead to hospitalization or permanent treatment.
• Property damage: includes buildings, belongings and pets, etc.

DANGER
Do NOT disassemble, repair or modify the unit or the battery.
Doing so may result in electric shock, fire, etc.
Do NOT place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
Doing so may result in fire or injuries.
Do NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Doing so may result in electric shock, fire, etc.
Only use the output socket to power external devices. Never connect the output to mains power under any circumstances.
Connecting to the mains may lead to electric shock, injuries or fire.
Do NOT touch the unit or the plug-in points if your hands are wet.
Doing so may result in electric shock.
Do NOT connect any metallic objects to the AC input or output.
Doing so may result in electric shock, fire, etc.
Do NOT rub your eyes if fluid from inside the unit should get in your eyes.
If this should occur, flush eyes with water and seek medical attention immediately.
This can lead to blindness.
Do NOT dispose the unit together with household waste.
Follow the local law to dispose the unit.
Do NOT use any inappropriate power cords.
Doing so may result in electric shock, fire, etc.
Do NOT operate the unit above the specified input voltage.
Doing so may result in electric shock, fire, etc.
Do NOT use the unit if it is not functioning correctly.
Doing so may result in electric shock, fire, damage to the unit, etc.
Do NOT move the unit if it is recharging or in use.
Doing so may result in electric shock, damage to the unit or other injuries.

WARNING
Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
Failure to do so may result in a short circuit, smoke or fire if metal dust or small metallic parts come in contact with the connections.
Check the unit prior to every use. Do not use the unit if it is damaged, broken.
If you notice that the unit has any damage or cracks, is broken, or has other abnormalities, do NoT continue to use the unit and contact your dealer or our customer service center.
Do not use the unit if the power cord is damaged or broken.
Keep the unit away from children. Do NOT let children use the power supply unit.
Doing so may result in an accident or injuries. This unit must not be used by children. The unit and its connection cables must be kept out of reach of children. Children must not play with the unit.
This unit may only be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are monitored or have been  instructed in how to safely use the unit and understand the resulting risks.
Keep this product away from pets.
Do NOT use or store the unit in an area or environment with high temperature.
Doing so may cause the unit to deform or overheat.
Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
Contact with the fluid may result in injuries.
In a storm, unplug the power cord from the socket.
A storm may result in an overcurrent coming from the socket, resulting in overheating, fire or other accidents.
Do NOT charge the unit via power supply systems that operate outside of 100-240V.
That may otherwise result in overheating, fire, etc.
Do NOT place the unit on its side or upside down while in use or storage.
Doing so may result in leakage or cause the unit to overheat leading to other accidents.

CAUTION
If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immediately and contact the dealer or our customer service center.
The unit complies with all legal requirements for transport of dangerous goods.
The capacity of the lithium battery pack in the unit exceeds 80 Wh.
Based on international standards: If this unit is to be sent by airplane, it must be transported in accordance with IATA standard packaging.
IATA instructions and labelling requirements and the relevant declarations must be completed.
Make sure that the unit is properly secured when transporting it in a motor vehicle.
Failure to do so may result in damage to the unit, electric shock, overheating, fire and other accidents.
Only charge and use the unit within an ambient temperature of 0 to 40 °C (32 – 104 °F).
operating the unit above or below this temperature range may result in overheating or reduced performance.
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
To prevent accidents, please contact the dealer or our customer service center to have the unit checked and repaired.
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.
Make sure that the device you are connecting is switched off before you connect it.
A device starting up suddenly may lead to accidents or injuries.
If the protective function is activated and the output of the device is switched off, disconnect the electric devices from the power output.
Switch the unit off in case of non-use/storage in order to prevent electric shock and the battery from discharging unnecessarily, etc.

TRANSPORTATION

1. Carry the unit with both hands.
   ATTENTION
   Keep the unit away from other objects when moving.
   ATTENTION
   Take extra care to ensure that the unit is never allowed to fall to the ground.

2. Placing the unit on a stable surface.
   ATTENTION
   Place the unit on a stable surface.
   By doing so, it is easier to read the indicators.

3. Transporting the device.
   DANGER
   The unit should not be subjected to any impact or vibrations otherwise there is a risk of fire.
   Keep the unit‘s original packaging and use it when you need to transport the unit.

GET TO KNOW YOUR AGFAPHOTO PPS 600PRO

Button and connector explanations
A. LCD Display
B. DC button
C. output #1: 1x DC 5.5mm (DC6530) | 12 V, 6 A
D. output #2: 2x USB-A | 5 V, 2.4 A (Total: 4.8 A)
E. output #3: 1x USB-A | 5 V, 3 A / 9 V, 2 A / 12 V, 1.5 A (Qualcomm QuickCharge™ 3.0)
F. AC button
G. Input: 1x DC 5.5mm (DC5521) | 5-30 V, 3 A (AC) | 12-14.5 V, 6 A (Car) | 17-30 V, 3 A (Solar)
H. output #4: 1x USB-C | 5 V, 3 A / 9 V, 2 A / 12 V, 1.5 A (PD 3.0)
I. Ventilation
K. output #5: 1x Cigarette-Lighter | 12 V, 8 A
L. output #6: 1x AC 230 V / 50 Hz | 500 W (1.000 W max.)

CHARGING

Before use or storage, plug your AgfaPhoto PPS 600Pro into the wall until it is fully charged. If the display shows less than 20% capacity, plug it into a power source, like an  AC outlet or a solar panel as soon as possible.
ATTENTION
only charge the unit when the ambient temperature is between 0 and +40 °C (32 – 104 °F).

6.1. WHAT IT CAN POWER

6.2. LCD-DISPLAY
The LCD display shows the total remaining charge and further information about your AgfaPhoto PPS 600Pro.

6.3. CHARGING VIA MAINS POWER SUPPLY

Connect the device to a wall socket using the supplied power adapter to charge it. When the AgfaPhoto PPS 600Pro is charging, the battery level symbol flashes. When fully charged, the battery level icon shows 100% and no longer flashes. Please unplug the charger from the socket as soon as the device is fully charged.

6.4. CHARGING VIA SOLAR PANEL (NOT INCLUDED)

1. Set up your solar module where it gets as much direct sunlight as possible.
2. Insert the plug of the solar module into the input socket on the device to start the charging process.

When the AgfaPhoto PPS 600Pro is charging, the battery level symbol flashes. When fully charged, the battery level icon shows 100% and no longer flashes.

6.5. CHARGING VIA CIGARETTE LIGHTER PORT

1. Start the vehicle you are want zo use to charge AgfaPhoto PPS 600Pro.
2. Insert the plug of the adapter into the input socket on the device to start the charging process.

When the AgfaPhoto PPS 600Pro is charging, the battery level symbol flashes. When fully charged, the battery level icon shows 100% and no longer flashes.

NOTE
Use the supplied charging accessories to charge the product.
Using other chargers can affect charging performance or cause the product to malfunction.
If you want to charge through a solar panel, we recommend a product with at least 60 W or 100 W output power.
Disconnect the device from the power supply when it is fully charged.
However, additional charging does not damage the battery.

TECHNICAL SPECIFICATIONS

General information
Net. Weight| 6,1 kg (13.5Ibs)
---|---
Working temperatures| 0°C – +40°C (32°F – 104°F)
Dimensions (LxVVxH)| 308 x 179 x 194 mm (12.1 x 7.1 x 7.6 inch)
Certificates| CE, FCC, UN38.3
Battery
Cell type| Lithium-Ion
Output 1Capacity| 650W continuous, 1.000W peak1644VVh
Lifecycles| —500
Management system| Overcharge protection, deep discharge protection,
Overcurrent protection, overload protection,
Short circuit protection
Electricity output| Pure sine wave
Ports|
Input I lx 5.5mm DC5521| 5-30V, 3A (AC)112-14.5V, 6A (Car)117-30V, 3A (Solar)
Output I lx Cigarette Lighter| 12V, 8A
Output I lx 5.5mm DC6530| 12V, 6A
Output 12x AC| 230 V / 50 Hz 500 W (1.000W max.)
Output I lx USB-C (PD 3.0)| 5V, 3A / 9V, 2A / 12V, 1.5A
Output I lx USB-A (QC 3.0)| 5V, 3A / 9V, 2A / 12V, 1.5A
Output 12x USB-A| 5V, 2.4A (Total: 4.8A)

NOTE
A pure sine wave inverter (as used in this product) provides the normal current continuously, like the electricity from the grid that we use every day.
ATTENTION
Short circuit protection
AgfaPhoto PPS 600Pro switches off the AC output for protection, if the load is> 650 W or the peak power is more than 1.000 W.

NOTE
This product supports Qualcomm QuickCharge™ 3.0. It delivers a maximum of 12 V, 1.5 A power for smart devices that also support Qualcomm QuickCharge ™ 3.0 technology.
The actual output voltage and current intensity depend on the respective smart devices.
This information can be obtained from the device manufacturer.

USING THE AGFAPHOTO PPS 600PRO

How can I charge devices via an AC connection with the AgfaPhoto PPS 600Pro?

How can I power devices with a 12V connection with the AgfaPhoto PPS 600Pro?

How can I charge USB devices with the AgfaPhoto PPS 600Pro?

Short press the DC button to turn on the USB outputs. If no device is charging, the outputs switch off automatically.

How can I switch off all outputs at the same time?

Press the AC button and the DC button at the same time to turn off all outputs.

Best-use

• When recharging devices with AgfaPhoto PPS 600Pro, you should take note of the battery indicator.

• If you plug in devices that have a high power requirement, the charge level of AgfaPhoto PPS 600Pro can drop quickly and you will not be able to extract the entire 644  Wh of energy.

• When the AC port is not in use, turn it off to save power.
  Appropriate temperature usage

• Charge protection: AgfaPhoto PPS 600Pro can charge your device when the ambient temperature is between -10 – 40°C. outside this temperature range, the system  automatically stops charging but will restart once the temperature is back inside the acceptable range.

• Discharge protection: AgfaPhoto PPS 600Pro can power your devices when the ambient temperature is between -10 – 40 °C. outside this temperature range the system automatically stops charging your device but will restart once the temperature is back inside the acceptable range.

NOTE
The AC output voltage and frequency standards are different in different countries
Please check the AC voltage before use and frequency of your device.
NOTE
AgfaPhoto PPS 600Pro supports simultaneous charge and discharge and power supply from all output ports at the same time.
ATTENTION
If the total output power is greater than 650 W, the AC output is temporarily switched off.

TROUBLESHOOTING

If your devices are not recharging as they should using AgfaPhoto PPS 600Pro follow these steps:

1. Ensure the device has been switched on and the LCD-Display is showing a remaining charge.
2. Check the battery indicator. If it is at 20% or below, recharge your AgfaPhoto PPS 600Pro.
3. Verify your device is suitable for use with the AgfaPhoto PPS 600Pro.
   a. All AgfaPhoto PPS 600Pro output ports have their own max. power. Check the AgfaPhoto PPS 600Pro’s technical specifications to ensure your device is compatible.
   b. Some devices with rechargeable batteries, like laptops and tablets, may draw more power when in use. In these cases, power down your device and recharge it.

What should I do if the unit gets wet?
Immediately turn off the unit and wait until you are certain that it is completely dry before turning it back on. If you are unsure about when it is safe to turn it back on, please contact after sales service.

FREQUENTLY ASKED QUESTIONS (FAQ)

1. What type of battery is in my AgfaPhoto PPS 600Pro?
   AgfaPhoto PPS 600Pro contains a 644 Wh lithium ion battery pack. Lithium ion batteries are much smaller and lighter than normal lead-acid batteries and also can be  cycled many more times.

2. How do I turn off the AgfaPhoto PPS 600Pro?
   This product has an intelligent USB port detection function. If no devices are connected or connected devices are fully charged, the USB ports are automatically  switched off. However, the AC outputs and DC outputs must be switched off manually. Long press the AC button and the DC button at the same time to switch off all  outputs.

3. Can I charge the AgfaPhoto PPS 600Pro while supplying power at the same time?
   yes. All outputs support simultaneous charging and discharging. Please note, however, that this only makes sense with a remaining battery capacity of more than 10%.

4. Can I take my AgfaPhoto PPS 600Pro on a plane?
   No!

STORAGE AND DOWNTIME MAINTENANCE

1. Charging to maximum capacity
   Fully charge the power supply unit prior to long-term storage. Charge the power supply unit at least once every three months and store the power supply unit only in a  dry and dust-free environment which is out of reach of children. Suitable storage temperature: -10 to 40°C (14 – 104 °F). Keep out of direct sunlight. Make sure that the  unit rests on a stable surface.

2. System shutdown
   If the system shuts down automatically because of lower battery capacity, please recharge it.

3. Cleaning
   Wipe away any dirt using a damp cloth.
   ATTENTION
   Gasoline, thinner, kerosene, petroleum, etc. have the characteristics of solvents.
   Do not use.

4. Failure
   Failure to maintain your AgfaPhoto PPS 600Pro by following these steps can result in battery damage which will void the product warranty.

SERVICE LIFE OF LITHIUM ION BATTERIES

Charge, supply current between 0 and 40°C (32 – 104 °F). Store between -10 and 45°C (14 – 113 °F).
Using the battery at temperatures outside the lower and upper limits reduces the battery‘s running time.
Do not connect a continuous load of more than 1.000 W.
The unit‘s output stops automatically in case of overloading, since it reduces the running time of the battery.
Do not continue to charge the battery after it has charged completely.
Pay attention to the indicated capacity. Do not charge the battery once it has been fully charged or the charging process has been concluded. otherwise the service life of the  lithium battery may be reduced.
Switch off the unit if it is not being used.
Unnecessary power consumption also reduces the running time of the lithium battery.
Fully charge the battery prior to placing it in storage.
Fully charge the power supply unit prior to lengthy periods of non-use for storage and recharge the unit at least once a year. After prolonged storage, it may be necessary to  charge and discharge the battery several times in order to reach full capacity.

DISPOSAL AND RECYCLING

Lithium ion battery
As soon as the end of the battery‘s service life is reached, the entire lithium ion battery can be recycled. Do not open or disassemble the unit.
Electric device
old electric devices may not be disposed together with normal household waste.
According to the directive 2012/19/EU, the device must be disposed of in a controlled manner at the end of its service life. The recyclable materials contained in the unit  shall be sent to recycling to reduce the burden on the environment.

This unit contains lithium ion batteries. These are hazardous materials and are subject to specific transport and handling regulations. Lithium ion batteries may ignite or  explode if handled incorrectly.
For the safe disposal of the unit, contact a collection point or your local municipality for more information and indicate that the unit contains lithium batteries.
Package
The product package consists of recyclable materials. Dispose of these in an environmentally friendly manner and sort the materials in the provided collection systems.

REPAIR TERMS AND CONDITIONS

1. In the case of device failure which can be attributed to poor workmanship, please take the original sales receipt with purchase date (invoice, etc.) to the retail store. In  case of normal use, the power supply unit will be repaired or replaced free of charge within the two year warranty period. In addition to that, the customer must bear any  shipping charges that may occur.
2. Note that we do not assume any liability for consequential damages (foreseeable damages, psychological damages, etc.).

CUSTOMER SERVICE

Contact distributor for technical support /customer service

EUROPE [GBT GmbH]

An Gut Nazareth 18A
52353 Düren
Germany| Telephone:
+49 (0) 2421 / 20 85 60| E-Mail:
info@gbt-international.com
---|---|---

AgfaPhoto is used under license of Agfa-Gevaert NV & Co.KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co.KG nor Agfa-Gevaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer.
Suitable for consumer imaging products.
Produced for and distributed by
GBT GmbH
An Gut Nazareth 18 A
D-52353 Düren
Made in P.R.C.
Contact:
AgfaPhoto Holding GmbH | www.agfaphoto.com
GBT GmbH | www.gbt-international.com
Product colors may slightly vary from shown.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
Quick Charge is a trademark of Qualcomm Incorporated.
All information contained in this document is subject to change without notice.
©2022 GBT GmbH

References

• It's Uptime | International® Trucks
• Die Produktvielfalt von AgfaPhoto: Kameras, Speicher, Zubehör ...
• GBT GmbH | Willkommen bei GBT International
• AgfaPhoto Powerstations und Solarpanels für unterwegs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>