OXS Thunder G1 7.1.2 Gaming Sound System User Manual
- June 16, 2024
- OXS
Table of Contents
OXS Thunder G1 7.1.2 Gaming Sound System User Manual
WHAT’S INSIDE
-
OXS Thunder Soundbar×1
-
Toggle Controller×1
-
Detachable feet for soundbar angle adjustment
-
Power Cable×1
-
Power Adapter×1
-
HDMI Cable×1
-
USB A to C Cable×1
-
Remote Control
DEVICE LAYOUT
1| Power Supply
| Power up the soundbar using the supplied power adapter
---|---|---
2| AUX IN
| AUX audio input
3| HEADSET JACK
| Plug in the headset or earphone wire to connect it to the soundbar
4| MIC IN JACK
| Connect an external microphone to the soundbar via a 3.5 mm stereo cable
5| CONTROLLER
| Plug in the toggle controller wire to connect it to the soundbar
6| LINK
| Press to pair with the OXS Satellite Neck Speaker (purchase separately)
1| USB-A
| Plug in the dongle to connect the OXS Satellite Neck Speaker (purchase
separately)
---|---|---
2| USB-C
| Plug in a USB (C-Type) cable to connect the soundbar to the PC
3| HDMI IN
| Plug in an HDMI cable to connect the soundbar to the gaming monitor or PC
4| HDMI eARC
| Plug in an HDMI cable to connect the soundbar to the gaming console
REMOTE
TOGGLE CONTROL
1| EQ
| Press to select the desired sound effect (FPS -> RAC -> MOBA -> STD)
---|---|---
2| Input
| Select source from TV -> HDMI -> PC -> BT -> AUX -> USB
4| Main Button
| Press & hold 3s Turn the soundbar on or standby
Press once Mute the soundbar
Rotate to adjust the volume
HOW TO USE
-
Positioning
Position the soundbar on a flat and stable surface as required in your setup.
-
Adjusting height
The extra pair of detachable feet lets you change the soundbar height to ensure that sound is delivered with the least amount of obstruction.
-
Connect Power
After connecting the power, the device enters standby mode.
-
Power on
Power on the soundbar by press and hold the button.
CONNECTING TO AN AUDIO SOURCE
Connecting via HDMI eARC/ARC
-
Connect the soundbar to any of the HDMI(eARC/ARC) ports on your TV using the included HDMI cable.
-
Switch the audio input to TV.
Connecting via HDMI IN
-
Connect any of the HDMI ports on your TV or monitor to the soundbar’s HDMI OUT port.
-
Connect any of the HDMI ports on your PC or gaming console to the soundbar’s HDMI IN port.
-
Switch the audio input to HDMI.
Connecting via the USB-C cable
-
Connect the soundbar to any of the USB-A ports on your PC using the included USB-C to USB-A cable.
-
Switch the audio input to the PC.
Connecting via the analog cable
-
Connect the device and the soundbar using an AUX cable
-
Switch the audio input to AUX
Connecting via Bluetooth
-
Switch the audio input to Bluetooth.
-
Select “OXS Thunder” on the device screen.
-
Once the connection is successful, the “BT” indicator on the soundbar will remain steady
SETTING THE SPEAKER AS THE DEFAULT DEVICE ENABLING DOLBY ATMOS
If you are using the soundbar for the first time, you may be required to set up the device as your system’s default playback device.
-
For Windows PC users
-
For MAC users
ENABLING DOLBY ATMOS
Please be noted, Dolby Atmos is only available via HDMI output. If you are using the soundbar for the first time, you may need to enable Dolby Atmos on your gaming console or PC. For more instructions, please go to below sites: https://games.dolby.com/atmos/documentation/#Platforms
ABOUT THIS MANUAL
The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download.
-
USER MANUAL
See this manual for product installation, components and connections. -
FULL MANUAL
You can access the FULL MANUAL or download it in document format from OXS’s website. (http://www.oxsaudio.com/support)
Design and specifications are subject to change without prior notice.
Thank you for purchasing this OXS product.
To receive more complete service, please follow us at
www.oxsaudio.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>