PHILIPS TAB4108 Soundbar User Manual

TAB4108 Soundbar
User Manual

Register your Product and get support at www.phillips.com/support

Important

Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.

Help and support
For extensive online support, visit www.philips.com/support to:

• download the user manual and the quick start guide
• watch video tutorials (available only for selected models)
•  find answers to frequently answered questions (FAQs)
• email us a question
• chat with our support representative.

Follow the instructions on the website to select your language, and then enter your product model number.
Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.

Important safety instructions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

•  Clean only with dry cloth.

• Do not block any ventilation openings.
  Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.
  A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.
  Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.  When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storm or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,  liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, + and – as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

• The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

  • The product/remote control may contain a coin/button type battery, which can be Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.
  • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
  • When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery tithe battery compartment cannot be completely secured, discontinue use  of the product Keep out of reach of children and contact the manufacturer
  • Apparatus shall not be exposed to dripping or splashing.
  • Do not place any sources of danger on the apparatus (for example. liquid filled objects, lighted candles).
  • This apparatus may contain lead and Dispose according to local. State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips.com.
  • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily
  • Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it A falling apparatus can cause serious injury or even death.
  • This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.

The symbol indicates polarity of d.c. power connector;
DC voltage

WARNING:To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Care for your product Use only microfiber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol on a product means that the product is covered by European Directive 2012/19/EU.

This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
Removing the disposable batteries To remove the disposable batteries, see battery installation section.

Compliance
This product complies with the radio interference requirements of the European Community. Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com.

Your Sound Bar

Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome.
Main unit
This section includes an overview of the main unit ![PHILIPS TAB4108 Soundbar

• Unit](https://manuals.plus/wp-content/uploads/2023/07/PHILIPS-TAB4108 -Soundbar-Unit.png)

  1. : Short press: Input source switch
     Long press: Power on/Standby

  2. : BT/USB mode: Play/Pause

  3. + : Decrease volume

  4. – : Increase volume

  5. : Sound bar LED indicator

Remote control

This section includes an overview of the remote control.

Connectors
This section includes an overview of the connectors available on your Sound Bar

1. AUX IN
   Audio input from, for example, an MP3 player (3.5mm jack).

2. HDMI (ARC)
   Connect to the HDMI input on the TV.

3. USB
   Support U disk to play music

4. DC IN
   Connect the sound bar to the power supply.

Connect

This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide.
Note

• For identification and supply ratings, refer to the type plate at the back or bottom of the product. • Before you make or change any connections, make sure that all devices are disconnected from the power outlet.

Placement
Place your Sound Bar as shown below.

Connect the SoundBar

Connect audio from TV and other devices
Option 1: Connect audio through a USB Best quality audio

USB: Support U disk to play music

Option 2: Connect audio through a 3.5mm stereo audio cable
Basic quality audio

Using a 3.5mm stereo audio cable, connect the AUX IN connector on your SoundBar to the LINE connector on theTV or other device

Option 3:Connect to HDMI (ARC) Socket
Your Soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by sing a single HDMI cable.

1. Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your Sound bar to the HDMIARC connector on the TV.
   The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual

2. On your TV, turn on HDMI-CEC operations. For details, see the TV user: manual.

Use your Sound Bar

This section helps you use the Sounder to play audio from connected devices
Before you start

• Make the necessary connections described in the Quick Start Guide or download the User Manual from www:philips.com/support.
• Switch the Sound Bar to the correct source for other devices.

Adjust the volume
When adjusting the volume of the sound-bar, the status indicator will show the current volume from 0 to max 30.
Adjust the volume

1. Press +/- on the soundbar or press Vol+/Vol- on the remote control to increase /decrease the volume level.
   Adjust the treble and bass volume

2. Press Bass -/+ on the remote control to increase/decrease subwoofer’s volume.

3. Press Treble -/+ on the remote control to increase/decrease Treble’s volume.

MP3 player
Connect your MP3 player to play your audio files or music.
What you need

• AnMP3 player
• A 35mm stereo audio cable.
  1. Using the 3.5mm stereo audio cable, connect the MP3 player to the AUX IN connector on your SoundBar:
  Switch USB input on the remote control Press the buttons on the MP3 player to select and play audio files or music.

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.
What you need

• A Bluetooth device which supports Bluetooth profile A2DP and AVRCP, and with Bluetooth version 4.2 or above
• The operational range between the Sound Bar and a Bluetooth device is approximately 4 meters (13 feet).
  1. Press O to turn on Sound Bar, switch to “bt” mode, LED indicator blinks at “bt” model
  2. On the Bluetooth device, switch on Bluetooth, search and select “TAB4108″ to start connection,
  3. When it connected, the LED indicator would stop blinking, with connected voice notification
  4. Select and play audio files or music on your Bluetooth device During play, if a call is coming, music play is paused.
  If your Bluetooth device supports AVRCP profile, on the remote control you can press I14/pl to skip to a track, or press miI to pause/resume play.
  5. To exit Bluetooth, select other source. When your switch back to Bluetooth mode Bluetooth connection remains active.

Note

• The music streaming may be interrupted by obstacles between the device and Sound Bar, such as wal, metallic casing that covers the device, or other devices nearby that operate in the same frequency.
• If you want to connect your Sound Bar with another Bluetooth device, press and hold Il on the remote control to disconnect the currently connected Bluetooth device.

Auto standby
When playing media from a connected device, this product automatically switches to standby after 15 minutes of button inactivity and no audio play from a connected device.

Update software
To continually improve the product, software upgrade may be offered. Visit www.philips.com/support to check if the latest software version is available.

Wall mount

Note

• Improper wall mounting may resulting accident, injury or damage. I you have any query, contact Consumer Care in your country.
• Before wall mounting make sure the wall can support the weight of your Sound Bar:

Screw length/diameter
Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter:

See the illustration in the quick start guide on how to wall mount the SoundBar

1. Drill two holes on the wall.
2. Secure the dowels and screws in the holes.
3. Hang the Sound Bar on the fastening screws

Note

• Specifications and design are subject to change without notice.

Amplifier

• RMS total output power: 30W RMS (10% THD)
• Frequency response:150 Hz-20 kHz / +3 dB
• Signal-to-noise ratio: > 75 dB (CCIR) / (A-weighted)
• Total Harmonic Distortion: <1%
• Input sensitivity:
• LINEIN:800mV +/-50mV

Bluetooth

• Bluetooth profiles: A2DP AVRCP
• Bluetooth version: 53
• Frequency band/Output power.
  2402 – 2480MHz / < 20 dBm

Main unit
Soundbar

• Output: 13v/1.8A

• Input:100-240V AC 50/60Hz

• Standby power consumption: <1W

• Dimensions (W x H x D)
  570 x73 x 80mm

• Weight:10kg

• Builtin speakers: 2 x full range (5.25″, 4 ohm)

Remote control batteries

• 2xAAA-15V

Standby information

• When the product remains inactive for 15 minutes, it automatically switches to standby or networked standby:
• When the product (soundbar) remains standby information, the power consumption in standby s less than TW.
• To deactivate Bluetooth connection, press and hold the Bluetooth button on the remote control.
• Toactivate Bluetooth connection, enable Bluetooth connection on your Bluetooth device.

Troubleshooting

Warning

• Risk of electric shock. Never remove the casing of the product.
• To keep the warranty valid, never try to repair the product yourself.
• If you have problems using this product, check the following points before you request service.
  If you still have a problem, get support at www.philips.com/support.

Main unit
The buttons on the SoundBar do not work.

• Disconnect the Sound Bar from the power supply for a few minutes, then reconnect.

Sound
No sound from SoundBar speakers.

• Connect the audio cable from your SoundBar to your TV or other devices.
• Reset your SoundBar to its factory settings.
• On the remote control, select the correct audio input,
• Make sure that the SoundBar is not muted, Distorted sound or echo.
• If you play audio from the TV through the SoundBar; make sure that the TV is muted

Bluetooth
A device cannot connect with the SoundBar.

• The device does not support the compatible profiles required for the SoundBar:

• You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.

• The device is not correctly connected.
  Connect the device correctly. (see ‘Play audio through Bluetooth’ on page 10)

• The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again.

Quality of audio play from a connected Bluetooth device is poor.

• The Bluetooth reception is poor: Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar.
  The connected Bluetooth device connects and disconnects constantly.

• The Bluetooth reception is poor. Move the device closer to the SoundBar; or remove any obstacle between the device and the SoundBar:

• Turn off Wi-Fi function on the Bluetooth device to avoid interference,

• For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of the Sound Bar.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Specifications are subject to change without notice,
Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsiility of MMD Hong Kong Holding Limited. or one of taaffeites, and MMD Hong Kong Holding Limited. is the warrantor in relation to this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>