ETHAN ALLEN 09-0535 Large Minetto Wood Pendant Chandelier Pendant Lamp Instruction Manual

June 12, 2024
ETHAN ALLEN

ETHAN ALLEN logo LARGE MINETTO WOOD PENDANT CHANDELIER/PENDANT
LAMP
ASSEMBLY INSTRUCTIONS
09-0535

IMPORTANT SAFETY INSTRUCTIONS

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING.
We strongly recommend that all direct-wired lighting products be installed by a licensed electrician. Two people may be required for installation. DO NOT EXCEED the rated bulb wattage. Keep flammable materials away from bulbs. This light fixture is shipped with all internal wiring intact. Do not open the product or alter the wiring in any manner.
Installation requires an electrical junction box in the ceiling sufficient to support the weight of the light fixture. This fixture weighs: 76.76 lbs. (34.82 kg).
WARNING: Be certain that the power to the electrical junction box is turned off at the circuit breaker before installation. Turning the power off at a light switch is not sufficient to prevent electrical shock.
CAUTION: Prior to installation, locate All INCLUDED PARTS before disposing of packaging materials.

TOOLS REQUIRED FOR INSTALLATION

Screwdrivers| Pliers
Electrical Tape| Wire Connectors
Wire Cutters| Adjustable Wrench

Note: Lightbulb(s) are not included, except where required by State of California Title 20. See light fixture for bulb specification. Additional wiring supplies may be required.

PARTS INCLUDED (See Figure 1):

Part| Qty.| Description
A| 1| Cable
B| 1| Canopy
C| 6| Bulb holder (E12)
D| 1| Lamp Base

Installation Procedure (See Figure 1)

ETHAN ALLEN 09-0535 Large Minetto Wood Pendant Chandelier Pendant Lamp -
Fig

  1. Drill at the ceiling to make a hole to match with the hook.
  2.  Screw the hook with the hole and ensure it is attached with the ceiling tightly.
  3. Hang the chandelier with the hook.
  4. Connect the household cable with the Chandelier’s Cable (A).
  5.  Connect the cable (A) to each pole. Remember the current for the product is 3A maximum.
  6.  Move the canopy (B) up to the ceiling and screw to lock it.

CARE AND CLEANING:

To clean, wipe the light fixture ONLY with a soft dry cloth.
In the event that the light fixture does not work, contact your local Ethan Allen Design Center.ETHAN ALLEN logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals