D-Link DI-604 Express EtherNetwork Broadband Router Quick Installation Manual
- June 12, 2024
- D-Link
Table of Contents
D-Link DI-604 Express EtherNetwork Broadband Router
Before You Begin
- If you purchased this router to share your high-speed Internet connection with other computers, you must have either an Ethernet-based Cable or a DSL modem with an established Internet account from an Internet Service Provider (ISP).
- It’s best to use the same computer that is connected to your modem for configuring the DI-604 router. The DI-604 Router acts as a DHCP server and will assign all the necessary IP address information on your network. See the Appendix at the end of this Quick Installation Guide or the Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
These are the items included with your DI-604 purchase:
If any of the above items are missing, please contact your reseller.
Connecting The DI-604 Broadband Router To Your Network
- A. First, connect the power adapter to the receptor at the back panel of the DI-604 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
- B. Insert one end of an Ethernet cable to the WAN port on the back panel of the DI-604 and the other end to the Ethernet port located on your Cable or DSL modem. The WAN LED light will illuminate to indicate proper connection.
- C. Insert one end of an Ethernet cable to LAN port 1 on the back panel of the DI-604 and the other end to an available Ethernet port on the network adapter in the computer you will use to configure the DI-604. The LED light for LAN Port 1 will illuminate to indicate proper connection.
( Note: Some computers already have network adapters pre-installed.)
Restart Your Computer
Connecting Additional Computers To The DI-604 Broadband Router
Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect your
Ethernet-equipped computer(s) to one of the 3 remaining Ethernet LAN ports on
the back panel of the DI-604.
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this:
Using The Setup Wizard
The logon pop-up screen will appear.
Once you have logged in, the Home screen will appear.
You will see the following screens.
Step 1 – Set up your new password. You have the option to establish a password.
Step 2 – Choose your time zone.
Select the type of Internet connection for your router.
If you selected Dynamic IP Address, this screen will appear:
If your ISP requires a Static IP Address, and this option is selected, then this screen will appear:
If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet) and this option is selected, then this screen will appear:
If your ISP uses Others (PPTP and BigPond Cable) and this option is selected, then this screen will appear
If your ISP uses PPTP and this option is selected, then this screen will appear
If your ISP uses BigPond Cable and this option is selected, then this screen will appear
Your Setup is Complete!
You will be returned to the Home tab.
Test Your Internet Connection
Relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM.
APPENDIX
To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DI-604 Broadband Router.
For Microsoft Windows XP:
Go to Start > right-click on My Network Places > select Properties > Double-
click on the Network Connection associated with the Ethernet adapter (i.e.,
D-Link DFE-530TX+).
For Apple Macintosh OS X:
Go to the Apple Menu and Select System Preferences.
The IP address information, the Subnet Mask, the Router’s IP address, and the Ethernet adapter address will appear.
Technical Support
You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.
- D- Link Technical Support over the Telephone:877-453-5465 24 hours a day, seven days a week
- D-Link Technical Support over the Internet:http://support.dlink.com
- email: support@dlink.com
FAQ’s
What is the DI-604 Express EtherNetwork Broadband Router?
The DI-604 is a broadband router manufactured by D-Link. It provides wired network connectivity to multiple devices and allows you to share an internet connection among them.
What are the key features of the DI-604 router?
The DI-604 router features four Ethernet LAN ports, an Ethernet WAN port, firewall protection, NAT (Network Address Translation) support, and support for various internet connection types, such as cable or DSL.
How do I set up the DI-604 router?
To set up the DI-604 router, connect it to your modem and power it on. Then, configure your computer's network settings to obtain an IP address automatically, and you can access the router's web-based configuration interface through a web browser to complete the setup process.
Can I use the DI-604 router for wireless connections?
No, the DI-604 router does not have built-in wireless capabilities. It only provides wired Ethernet connections.
How can I secure my network when using the DI-604 router?
The DI-604 router supports basic security features such as firewall protection and NAT, but it does not support advanced encryption standards like WPA or WPA2. To secure your network, you can enable the router's firewall, use strong passwords for your devices, and consider using additional security measures like a separate hardware firewall or a software firewall on your computer.
Can I connect multiple computers to the DI-604 router?
Yes, you can connect up to four computers or other Ethernet-enabled devices to the DI-604 router using Ethernet cables.
Does the DI-604 router support VPN (Virtual Private Network) connections?
The DI-604 router does not have built-in VPN support. However, you can set up VPN connections using third-party VPN software on your connected devices.
Can I use the DI-604 router with a dynamic IP address?
Yes, the DI-604 router supports dynamic IP addresses provided by your internet service provider. It can automatically obtain an IP address from your ISP during the setup process.
How can I update the firmware of the DI-604 router?
To update the firmware of the DI-604 router, visit the D-Link website and search for the latest firmware for your router model. Download the firmware file and access the router's web-based configuration interface. Navigate to the firmware upgrade section and follow the on-screen instructions to upload and install the new firmware.
Can I use the DI-604 router with a static IP address?
Yes, the DI-604 router supports static IP addresses. During the setup process, instead of obtaining an IP address automatically, you can enter the specific static IP address, subnet mask, gateway IP, and DNS server IP addresses provided by your ISP.
Can I use the DI-604 router with a different brand of modem?
Yes, the DI-604 router is compatible with most modems regardless of the brand, as long as the modem has an Ethernet output port. You can connect the modem's Ethernet output to the DI-604 router's WAN port.
What should I do if I forget the login credentials for the DI-604 router?
If you forget the login credentials for the DI-604 router, you can perform a factory reset. Locate the reset button on the router (usually at the back) and press it for about 10 seconds using a paperclip or a small pin. This will reset the router's settings to the default values, including the login credentials.
Download This PDF Link:D-Link DI-604 Express EtherNetwork Broadband Router Quick Installation Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>