SOLAX POWER 7.2 kW – 22 kW EV Charger Installation Guide
- June 12, 2024
- SOLAX POWER
Table of Contents
POWER 7.2 kW – 22 kW EV Charger
Installation Guide
Quick Installation Guide
EV-Charger 7.2 kW-22 kW
Packing List
Installation Steps
STEP 1: Remove the screw from the EV-Charger with the cross screwdriver. Then remove the back bracket away carefully.
STEP 2: Fix the back bracket and the cable hook (only for type P) to the wall.
STEP 3: Hang the EV-Charger on the wall for trial, then estimate the required
length of input cable (three-core or e-core, φ13-18 mm) and communication
cable. After that, take the EV-Charger down.
STEP 4: Unscrew the EV-Charger’s rear cover with the cross screwdriver and
take it down. Then undo the fastening heads and take the waterproof materials
away as shown below.
STEP 5: Unscrew the countersunk screw of the base plate of communication board
with the cross screwdriver. Then pull the base plate of communication board
out . STEP 6: Insert the prepared communication cable through the waterproof
connector in sequence (If the cable is self-made, also insert the wires into
the RJ45 terminals and then use crimping pliers to press them tightly).
STEP 7: Strip the outer sheath of the input cable for a length of 70 mm,
ensuring all the wires can reach the terminal blocks with a little excessive
length. Use the stripping pliers to strip approx. 12 mm of insulation from the
end of all the cultured wires as below. Then crimp the European terminal with
the wire crimper.
STEP 8: Insert the input cable through the waterproof connector in
sequence.
STEP 9: Insert the wires into the terminal blocks, then block the terminal
with the s straight screwdriver .
STEP 10: Press the spring upward and push the base plate of communication
board in. Then screw the countersunk screw.
STEP 11: Push the rear cover to appropriate position of the cables and screw
the self tapping screws with the cross screwdriver. Then tighten the
waterproof fastening head. 
CT & WIFI Connection
► CT Connection
Diagram:
-Steady the CT on the public grid.
-Insert the other end of the communication cable and the terminal of CT on each side of the adapter.
NOTE!
- Do not place the CT on the N Wire or the PE wire.
- Do not place the CT on the N and L wire simultaneously.
- Do not place the CT on the non-insulated wires.
- When using the three-phase CT, please clip the CT clamps on the corresponding phases.
► WIFI Connection
Step 1: Use your smart phone to scan below QR code or search for the keyword
“SolaXCloud” in browser to download the Monitoring App.
|
---|---
https://itunes.apple.com/cn/app/solaxcloud/id1300059673?mt=8|
https://play.google.com/store/apps/details?id=com.solaxcloud.starter
Step 2: Create a new account on the Monitoring App.
Step 3: Login and turn to Account page in the app. Then click “Wi-Fi
Connection” and follow the instructions to complete the process.
614.00742.00
Documents / Resources
|
SOLAX POWER 7.2 kW - 22 kW EV
Charger
[pdf] Installation Guide
7.2 kW - 22 kW EV Charger, 7.2 kW - 22 kW, EV Charger, Charger
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>