SelectBlinds Sheer Vertical Shades Installation Guide
- June 12, 2024
- SelectBlinds
Table of Contents
SelectBlinds Sheer Vertical Shades
Product Information: Sheer Vertical Shades
The Sheer Vertical Shades are a type of window treatment that combines the functionality of vertical blinds with the elegance of sheer fabric. These shades are designed to provide privacy and light control while adding a touch of sophistication to any room.
Product Usage Instructions
Fitting the Brackets
- Top-Fixing: Screw the brackets into the lintel (or ‘ceiling’) of the recess.
- Face-Fixing: Screw the brackets onto a facing surface, such as a wall or window frame.
Fitting the Track:
Rest the front lip of the headrail in the front lip of the bracket. Then twist
the back of the headrail upwards until it snaps into place in the rear hook of
the bracket.
Attaching the Fabric to the Hangers
Take the louvres and fold each into a ‘C’ shape. Connect each louvre to the
next using the clip hangers. Once all the louvres are connected together, add
a clip to the loose end of the outermost louvres.
Hanging the Fabric
- Twist the control wand to turn the hooks so that their ‘open’ part is facing into the room.
- Take the connected louvres and click the hangers into the hooks on the headrail, working along from one end to the other.
Fitting the brackets
The brackets offer two methods of installation:
Top-Fixing
Where the brackets are screwed into the lintel (or ‘ceiling’ of the recess)
Face-Fixing
Where the brackets are screwed onto a facing surface (a wall or window frame)
Fitting the track
- Rest the front lip of the headrail in the front lip of the bracket.
- Then twist the back of the headrail upwards until it snaps into place in the rear hook of the bracket.
Attaching the fabric to the hangers
Take the louvres and fold each into a ‘C’ shape. Connect each louvre to the
next using the clip hangers, as shown. Once all the louvres are connected
together, add a clip to the loose end of the outermost louvres.
Hanging the fabric
- Twist the control wand to turn the hooks so that their ‘open’ part is facing into the room.
- Take the connected louvres and click the hangers into the hooks on the headrail, working along from one end to the other.
Fitting the brackets
The brackets offer two methods of installation:
-
Top-Fixing
Where the brackets are screwed into the lintel (or ‘ceiling’ of the recess) -
Face-Fixing
Where the brackets are screwed onto a facing surface (a wall or window frame)
Fitting the track
- Rest the foremost of the lips on the headrail in the front lip of the bracket.
- Then twist the back of the headrail upwards until it snaps into place in the rear hook of the bracket.
Attaching the fabric to the hangers
Take the louvres and fold each into a ‘C’ shape. Connect each louvre to the
next using the clip hangers, as shown. Once all the louvres are connected
together, add a clip to the loose end of the outermost louvres.
Hanging the fabric
- Twist the control wand to turn the hooks so that their ‘open’ part is facing into the room.
- Take the connected louvres and click the hangers into the hooks on the headrail, working along from one end to the other.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>