SelectBlinds 2 Inch Neutral Faux Wood Blinds Installation Guide
- October 30, 2023
- SelectBlinds
Table of Contents
SelectBlinds 2 Inch Neutral Faux Wood Blinds
TOOLS
GETTING STARTED – TOOLS NEEDED FOR INSTALLATION
Rechargeable Drill with 1/4” Hex Bit / Phillips Screwdriver / Pencil / Tape
Measure
UNPACKING THE PARTS
- Locate the parts and brackets in hardware box.
- The quantity will vary with blind size.
- Hold-down parts will only be sent for blinds that have requested this option.
- Center Support Bracket will only be sent for blinds over 37” wide.
BRACKET PLACEMENT
VALANCE CLIPS & WAND
FINISHING UP
OPERATING INSTURCTIONS
Raise or lower the blind by lifting or lowering the bottom rail to the desired height.
PLEASE NOTE : This product is made up to +6” of ordered height. Blinds over 84” may include up to 10” of additional height. This is normal for this product and not considered a manufacturing error or defect.
Open or close the blind slats by turning the wand until the slats are opened or closed to the desired amount
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>