Hytronics LMCB-75CSWS-MV LMCB Series LED Canopy Light Instruction Manual
- June 12, 2024
- Hytronics
Table of Contents
LMCB-75CSWS-MV LMCB Series LED Canopy Light
Instruction Manual
LMCB-75CSWS-MV LMCB Series LED Canopy Light
WARNING
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
- To prevent personal injury or product damage only licensed electricians should install
- To avoid electric shock or component damage disconnect power before attempting installation or servicing.
- Disconnect product and allow cooling prior to servicing.
- Any alteration or modification of this product is forbidden as it may cause personal injury.death,propertydamage and/or product malfunction.
- To prevent product malfunction and/or electrical shock this product must be properly grounded.
- This luminaire is designed to operate in ambient temperatures ranging from -40°C to 50°C (-40°F to 122°F)
- CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
Surface Mount with Jobs
- Loosen the screw on the side of the housing and pull out the connecting plate.
- Fix the connecting plate onto the ceiling and put the wire through center hole.
- If you need to use the surface-mounted installation, a circle of glue is needed around the edge of the fixed plate.
- Buckle the connecting plate into the clips and connect the wires as shown below. PS: Wire the dimming wires (DIM+/DIM-) if needed, otherwise hide them in junction box.
- Slide lamp back into the connecting plate and fix the screw.
Pendent Installation with 3/4 inch conduit
-
Loosen the screw on the side of the housing and pull out the connecting plate.
-
Connect the wires as shown below.
PS: Wire the dimming wires (DIM+/DIM-) if needed, otherwise hide them in junction box.
-
Screw the lamp and conduit pole together tightly.
CCT & Power Select Guidance
Warning:
- Select desired CCT & Power before operation!
- Cap must be screwed back after CCT & Power selection!
Read User Manual Online (PDF format)
Loading......