nordlux YKT5BF1-L90-2700K RENTON 90 White Plastic Batten Integrated LED Instruction Manual

June 12, 2024
nordlux

nordlux YKT5BF1-L90-2700K RENTON 90 White Plastic Batten Integrated LED

Product Information

  • Product Name: RENTON
  • Product Size: 300mm
  • Included in the package: 1 piece
  • Inter-connection: Can be inter-connected directly or using the included inter-connection cable
  • Max. number of inter-connected units: 9 pcs
  • IP Rating: IP20

Product Usage Instructions

  1. Shut off power to the circuit before starting installation work.
  2. Ensure that electrical installation work is carried out by an authorized electrical contractor, if required by local regulations.
  3. Connect the product to the power source using the appropriate electrical connections.
  4. If inter-connecting multiple units, either connect them directly or use the included inter-connection cable.
  5. Follow the local electricity authority’s guidelines and regulations regarding electrical installation.
  6. The light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
  7. For any maintenance or repair work, contact the manufacturer, their official service agent, or a qualified professional to avoid any potential hazards or accidents.
  8. Properly dispose of any waste equipment according to local regulations. Contact your local waste disposal authority or the store where you purchased the product for guidance.
  9. Follow the provided mounting instructions for proper installation of the product.
  10. For additional information and specific instructions, refer to the “Monteringsanvisning”, “Montageanleitung”, “Mounting instruction”, “Installationsanvisningar”, “Instructions de montage”, or “Montage-instructies” sections of the user manual. de montage | Montage-instructies

Installation

nordlux-YKT5BF1-L90-2700K-RENTON-90-White-Plastic-Batten-Integrated-LED-
product-1

Max. number of inter-connected: 9pcs nordlux-YKT5BF1-L90-2700K-
RENTON-90-White-Plastic-Batten-Integrated-LED-product-2

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer, his service agent or a similar qualified person in order t o avoid a hazard.

  • IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
  • Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
  • The mounting instruction must not be discarded.

Safety Instructions

IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

Disposal Instructions

Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more  information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.

Usage

For indoor use only.

Contact Information

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals