CROSLEY CR3041A-SG Forte Radio Instruction Manual
- June 4, 2024
- Crosley
Table of Contents
CR3041A-SG Forte Radio
Instruction Manual
Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. –6 p.m., EST, Monday- Friday
1-888-CROSLEY
www.crosleyradio.com
Safety Instructions
Read and understand this entire manual before using this product. Keep these instructions for future reference.
- Do not use this product near water.
- This product should be operated only by the type of power source indicated on the marking label or in this instruction manual.
- Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
- Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
- Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Do not use attachments not recommended by the product manufacturer as they may cause hazards.
- A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
- Slots and openings in the cabinet are provided for ventilation and to ensure the reliable operation of the product and to protect it from overheating. Do not block or cover these openings.
- Unplug the product during lightning storms or when unused for long periods of time.
- The maximum ambient temperature during use of the appliance must not exceed +40 °C
- The main plug of the power cordset is used as the disconnect device, the disconnect device shall remain readily operable
- CAUTION
1)Risk of fire or explosion if the battery is replaced by an incorrect type;
2)Replacement of a battery with an incorrect type that can defeat a safeguard;
3)Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
4 )Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
5)A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Items in this package
Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package:
- Radio
- Power plug
Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
Specifications
Power| AC 120 V / 60 Hz
AA Batteries X 4 (Not Included)
---|---
Power consumption| 7W
Speaker| 3″ 40, 3W
Frequency Range| AM 520 – 1710 kHz
FM 87.5 -108 MHz
Note:
- Design and specifications are subject to change without notice.
- To help save power consumption. some models will comply with ERP energy-saving standards. When there is no audio input for 20 minutes. their powers will automatically cut-off. To turn the power back on and resume playing. you will need to turn off the power and turn it on again.
Product Description
-
Bluetooth Indicator
-
Tuning Indicator
-
Tuning Knob
-
Dial Scale
-
On/Off Volume Knob
-
Function Switch
-
Aux In Jack
-
Headphone Jack
-
Battery Compartment
-
Power Jack
Initial Setup
Essential Setup
- Place the unit on a flat and level surface. The selected location should be stable and free from vibration.
- Connect the power plug to the Power Jack of the unit.
Note: Do not plug the power plug into the power outlet before all the assembly is completed. Before turning the power on, make sure again all the connection settings are correct. Always turn off the power when connecting or disconnecting.
Battery Backup
- Press in on the locking tabs to remove the battery cover.
- Insert 4 AA batteries into the battery compartment.
- Insert tabs into the battery compartment and push locking tabs in place.
Volume Control
Rotate the On/Off Volume Knob clockwise and counterclockwise to raise and
lower the volume.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speaker. To do this, connect the 3.5mm auxiliary cable (not included) between
your audio device and the Aux In Jack.
Note: The aux in connection has the highest priority of al/ the functions.
When there is an auxiliary cable plugged in, the aux-in connection will
automatically override the Bluetooth or radio functions. To resume using the
other features of the unit, unplug the auxiliary cable from the aux-in Jack.
Bluetooth Operation
-
Set the Function Switch to Bluetooth mode }
Note: The Bluetooth indicator will be flashing blue. -
Turn on the Bluetooth feature of your audio device, search for “CROSLEY CR3041A” and pair.
-
Once your device is successfully paired with the unit, you will hear a short confirmation sound from the unit, and the Bluetooth indicator will be blue.
-
Play and stream music from your device to the unit.
Note: 8/uetooth version — 5.0
Radio Operation
- Set the Function Switch to AM or FM position.
- Rotate the Tuning Knob for the desired radio station.
Note:
• The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit for better reception.
• If the FM reception is poor, extend the FM Antenna on the back of the unit for better reception.
Troubleshooting
There is no power
- No power at the power outlet.
- Ensure the power plug is properly inserted.
- Replace batteries if using without a power plug.
- To help save power consumption, some models will comply with ERP energy-saving standards. When there is no audio input for 20 minutes, their powers will automatically cut off. To turn the power back on and resume playing, turn off the power and turn it on again.
Bluetooth not connecting
- Forget the device then try connecting again.
- Ensure you are not too far away from the unit when connecting.
- Power cycle both devices and try steps to connect again.
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Modern Marketing Concepts Inc. dba Crosley Brands, declares that the
radio equipment type is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet
address: http://crosleybrands.com/euDoC
| Class ll equipment
---|---
| AC voltage
| DC voltage
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>