CROSLEY CR6037BT Mini Turntable Instruction Manual

CROSLEY CR6037BT Mini Turntable

Specifications

• Power: Micro USB Cable / 4 x AAA Batteries (Not Included)
• Power consumption: 2W
• Turntable speed: 33 1/3 RPM
• Replacement needle: Crosley NP5

Product Description

1. Turntable Spindle
2. Turntable Platter
3. On/Off-Volume Knob
4. Power Indicator
5. Headshell
6. Pitch Control
7. Tonearm Rest
8. Tonearm
9. Record Adapter
10. Headphone/Aux Out Jack
11. Power Jack
12. Battery Compartment

Product Usage Instructions

Safety Instructions Read and understand the entire manual before using the product.
Keep instructions for future reference.

1. Do not use near water.
2. Operate only with the specified power source.
3. Do not alter the polarized plug.

Turntable Bluetooth Output Operation

1. Place Bluetooth device close to turntable.
2. Set device to pairing mode.
3. Press and hold On/Off Volume Knob to power on.
4. Your turntable will automatically connect to the audio device in pairing mode.

Aux Output Connection Connect speakers to play music through them.

1. Connect 3.5mm auxiliary cable between speakers and Headphone/Aux Out Jack.
2. Start playing music.

Pitch Control Adjust turntable speed by pushing Pitch Control up or down approximately 10%.

Needle Replacement Detailed steps for removing and installing the needle are provided in the manual.

FAQ

Q: What should I do if there are missing parts? A: Contact Crosley customer service for assistance regarding missing accessories.

Q: How do I know if the turntable is connected via Bluetooth? A: The function indicator will be solid blue when the pairing is complete.

CR6037BT
RSD3 Mini Turntable
Instruction Manual

Questions, problems,missing parts?
Before returning to the store, call Customer Service
8 a.m. – 6 p.m., EST, Monday – Friday
1-888-CROSLEY
www.crosleyradio.com

Safety Instructions

Read and understand this entire manual before using this product. Keep these instructions for future reference.

1. Do not use this product near water.
2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual.
3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician.
4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
5. Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
6. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
7.  Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
8. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
9. Do not use attachments not recommended by the product manufacturer as they may cause hazards.
10.  A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings.
12. Unplug the product during lightning storms or when unused for long periods of time.

Items in this package

Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package:

• Turntable
• Turntable Lid
• Record adapter x 2
• Micro USB Cable
• Aux Out Cable
• 3.5 MM to RCA

Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.

Specifications

• Power Micro USB Cable / 4 x AAA Batteries (Not Included)
• Power consumption 2W
• Turntable speed 331/3 RPM
• Replacement needle Crosley NP5

Note:

• Design and specifications are subject to change without notice.
• To help save power consumption, some models will comply with ERP energysaving standard. When there is no audio input for 20 minutes, the power willautomatically cut-off. To turn power back on and resume playing, you will need toturn off the power and turn it on again.

Product Description

1. Turntable Spindle
2. Turntable Platter
3. On/Off-Volume Knob
4. Power Indicator
5. Headshell
6. Pitch Control
7. Tonearm Rest
8. Tonearm
9. Record Adapter
10. Headphone/Aux Out Jack
11. Power Jack
12. Battery Compartment

Turntable Bluetooth Output Operation

This turntable features Bluetooth output which is a device that transmits audio from this turntable to another Bluetooth device such as wireless Bluetooth headphones, Bluetooth speakers, or other Bluetooth receiving devices.

1. Place the audio device that supports Bluetooth technology as close to your turntable as possible.

2. Set the device that you would like to connect to pairing mode.

3.  Press and hold the On/Off Volume Knob to turn on the power.
   Note: The function indicator will slowly flash blue.

4. Your turntable will connect automatically to your audio device once they are both in pairing mode.

5. When the pairing is complete, the function indicator will be solid blue.
   Note: If pairing is unsuccessful, make sure your audio device is not paired/connected to another Bluetooth device.

6. Place the record on the turntable. Use the Record Adapter if necessary.

7. Remove the stylus protector from the stylus assembly.
   Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned.

8. Lift tonearm from the tonearm rest.
   Note: When the turntable is not in use, push the tonearm into the tonearm rest to secure it.

9. ove the tonearm over the record to desired starting point, and gently lower tonearm onto record.

10. When the record is finished playing, lift tonearm, and return it to the Tonearm Rest.

11. Push the tonearm into the tonearm rest.

12. To start and stop the platter rotation, short press the ON/OFF Volume Knob.

Aux Output Connection

You can connect speakers to this unit and play your music through your speakers. To do this, connect the 3.5mm auxiliary cable between your active speakers and the Headphone/Aux Out Jack of this unit and start playing the music.

Pitch Control

The turntable speed can be increased or decreased by approximately 10% by pushing the Pitch Control up or down. To increase the speed, push the Pitch Control up. To decrease the speed, push the Pitch Control down.

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.
2. Pull needle forward.
3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.
2. Line up the back of the needle with the cartridge.
3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place.

FCC Statements

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there
is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

References

• crosleyradio.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>