SPK-LEDME-371 Laser RGB Party Speaker with LED Message Panel User Manual
- June 12, 2024
- Laser
Table of Contents
SPK-LEDME-371 Laser RGB Party Speaker with LED Message Panel
WHAT’S IN THE BOX
- RGB Party Speaker with LED Messaging Panel
- AC Adaptor
- Remote Control (2 x AAA battery not included)
- Wireless Microphone x 2 (4 x AA battery not included)
- User Manual
SPECIFICATIONS
SAFETY INSTRUCTION
- Only use the AC adaptor that comes with the speaker to charge it.
- Don’t overcharge the speaker. When the battery is full, unplug it from the charger.
- This product has a rechargeable lithium battery, so avoid using it near fire or in extreme conditions. Also, be careful not to drop or hit the speaker during use or storage.
- When you’re ready to dispose of the speaker, make sure to follow your local regulations for disposing of products that have batteries.
PRODUCT DIAGRAM
CONTROL PANEL
- Mic Volume Regulating Knob
- Echo Regulating Knob
- Remote Control Receiver
- Master Volume Knob
- Bass Regulating Knob
- Treble Regulating Knob
- Record/Delete Button
- Next Track Button
- Play/Pause/Scan Button
- Previous Track Button
- Mode/TWS Button
- Power Switch
- Charging Indicator
- DC Port
- USB Port
- AUX IN Jack
- Micro SD Slot
- Microphone Jack
- Mic Priority Button
- Vocal Cut Button
- App Button
- EQ Button
- RGB Lighting Button
REMOTE CONTROL
- Power: press to stand by/resume when the speaker is turned on.
- : Press to mute/unmute in all modes.
- APP=: press and hold to turn on/off the APP control to the LED screen.
- MODE: to change mode, change music folder, or pair/unpair TWS speakers.
- SCAN: In FM mode, press and hold to execute the auto search.
- EQ
- TWS: In Bluetooth mode, press to pair/unpair two same speakers.
- : Press to change RGB lighting.
- VOL+/VOL-
- : previous track/ channel
- : press to play/pause; press and hold to change playlist mode (All/Random/One/Folder)
- : next track/ channel
- Numeric Keys 0-9: in USB/Micro SD modes, input the track number to go to a certain track; in FM mode, if you want to select radio frequency 107.5MHz just input “1075”.
HOW TO USE THIS PARTY SPEAKER
- Before you use your speaker for the first time, make sure to charge it using the charger that came with it. The charging light will turn off when the battery is full.
- To turn on the speaker, press the power swtich on the top of the speaker. To put it in standby mode, press the power button on the remote control. To turn it back on, press the power swtich on the remote control again.
Pairing:
To connect your phone to the speaker using Bluetooth, turn on Bluetooth on
your phone and look for “SPK-LEDME-371” to connect to it. If you have two
speakers, you can pair them up by pressing and holding the MODE/TWS button on
one of the speakers until you hear a sound. To disconnect, press and hold the
same button.
Change Mode:
To switch between Bluetooth, USB, Micro SD, AUX, and FM modes, press the
“MODE” button on the top of the speaker.
Karaoke:
- To sing along with the music using the wireless or wired microphones, simply use the microphones provided or plug in your own wired microphone. To adjust the volume or EQ, use the Volume + /- buttons on the top of the speaker or the remote control. To switch between different EQ modes, press the EQ button.
- MIC PRIORITY: press to reduce/restore background music when detecting microphone input.
- VOCAL CUT: press to cancel/restore the vocal tone of the music.
Recording:
- Plug in a USB drive or Micro SD card into the speaker.
- Connect a microphone to the speaker. It can be a wired or wireless microphone.
- Press the button on the top of the speaker that says REC/DEL to start recording. You’ll see a light on the speaker that shows it’s recording, and you’ll see the time on the screen.
- When you’re finished recording, press the same button again to stop recording. The audio you recorded will be saved to a special folder on the USB drive or Micro SD card and start playing.
- To listen to the recording, use the MODE button to switch to USB or Micro SD mode and choose the special folder. You can use the Volume buttons to turn it up or down.
- If you want to delete the recording, hold down the REC/DEL button until you see a message on the screen asking if you want to delete it. Press the REC/DEL button again to confirm and delete it.
Remember to keep the “Echo” setting to a minimum and keep the microphone at a good distance from the speaker to avoid any strange noises. Have fun recording your voice or singing!
FM Mode:
- To listen to FM radio, press the “MODE” button until you reach the FM mode. Use the Previous/Next buttons to search for radio stations. To auto-scan for available radio stations, press and hold the Play/Pause button.
APP CONTROL
Setup
This product has a special screen that can show different colorful pictures or
animations that you can make yourself or download from a special app. To use
this function, you need to download the SPOTLED app on your phone by scanning
the QR code provided or searching for it on the Apple Store or Google Play.
When you first download and open the SPOTLED App, you’ll see a message asking for your permission to send you notifications. You can choose to say no if you don’t want to receive notifications. However, you will need to accept the terms and conditions of using the App, as well as its privacy policy. You will also need to allow the App to access your location.
APP CONTROL
Service Agreement and Privacy Policy
Thank you for using SPOTLED, some of your personal information may be
collected, used, and shared during your use of the software. Please read the
Service Agreement and Privacy Policy carefully and make sure that you are
fully aware of our rules regarding the handling of your personal information,
If you agree to the Service Agreement and Privacy Policy, please click Agree
to stall using SPOTLED.
Use your location
SPOTLED APP collects location data to enable the below features even when the
app is closed or not in use.
- In order to use Bluetooth.
- Discover nearby beacon devices.
When you allow background location, it will give you a better experience
Create your own message
- Connect the speaker to your phone.
- Press and hold the “APP” button on the speaker or remote control.
- Open the SPOTLED app on your phone and click “Click to connect device.”
- Choose the device name to connect.
- Create your art.
- Use the “Graffiti” option to draw on a blank canvas, edit a photo from your album, or take a new picture to start with.
- Use different tools like colors, erasers, and zoom to make your art.
- Use the “Mirror,” “Move and Zoom,” and “Animation” options to make your art move and change.
- Use the “Music,” “Picture,” and “Text” options to play music, display pictures, or add text to your art.
- Make a playlist.
- Choose your favourite art pieces from your own work or the public square to create a playlist.
TROUBLESHOOTING
No power:
- A 9V /1.SA AC adapter is required for charging the speaker.
- Check battery level and charge if required.
- Try turning on speaker while connected to a power source.
Problems connecting to Bluetooth:
- Place the Speaker next to the smart device you are pairing to e.g., a Smartphone.
- If the Bluetooth name “SPK-LEDME-371” does not appear on the list of available devices, then try refreshing the list or searching again.
- Allow up to 1 minute for the device to appear on the Bluetooth list.
- Make sure the Speaker is in Bluetooth mode (default mode when turning on the speaker) before connecting to a smart device.
Unable to display a custom message on screen:
- Press and hold the APP button on the control panel or remote control, and ensure the LED screen shows “APP ON”.
- Make sure your smart device has turned on Bluetooth. Open the SPOTLED App on your device and click “Click to connect device” on the main page, then connect to the available device.
Unable to pair up two speakers using the “TWS” function:
- Don’t turn on the Bluetooth function on your smart device until two speakers are already paired up.
Laser Corporation is 100% Australian-owned & operated. To get the most out of your product please read the user manual carefully and keep for future use. For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:
Visit our website
www.laserco.com.au.
Check us out at
www.youtube.com/lasercoau.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>