MONSTER Airmars XKT21 Wireless Gaming Headphones User Guide
- June 12, 2024
- Monster
Table of Contents
MONSTER Airmars XKT21 Wireless Gaming Headphones
Basic Information
| Produ ct Name | Bluetooth Wireless Headphones |
|---|---|
| Model No | Monster Airmars XKT21 |
| Type | Clip -on type |
| Bluetooth | VS.3 |
| Bluetooth Profile | AVRCP/ A2DP/ AVCTP/ AVDTP/H FP/HSP/SPP |
| Bluetooth distance | ≥ om |
| Frequency | 20kHz |
| Speaker size | ø 10mm |
| Sensitivity | ≤ 8 4dBm |
| Earbuds Battery | 60mAh |
| Charging Case Battery | 400mAh |
| Playing Time | Earbuds: 3.SH With Charging case : 22H |
| Type-c Input | DC SV __ 300mA |
| Speaker size | 8Ω±15% |
| Earbuds Charging Time | 1.SH |
| Case Charging Time | 1.SH |
| Net weight | 45G |
Changing
Power On/Power Off
Power on
Take out earbuds from charging case and then long touch 2 seconds
Power off
Put into charging case Long touch 5 seconds Turn off the device after 5 mins
without connecting the earbuds
Bluetooth Pairing
PAIRING
- take out earbuds from charging case
- Turn on your mobile phone’s Bluetooth and search for the pairing name
- Select “Monster Airmars XKT21” and connect to it
- After Pairing successfully, earbuds play prompt voice “connect”.
Wearing Method
Operational approach
Operation
| Left/Right
---|---
Power On/Power Off|
Long press 2S/Long Press 5S
Play/ Pause
| Double Click
Previous/Next|
Triple-click
V+/V-
| Click
Answer/Hang up|
Double Click
Reject
| On Call: Long press 2S
Siri Voice Assistant|
Long Press 1.5S
LED light
Earbuds Indicator Light
Power on| Blue light 1 second
Power off| Red light 2 second
Pairing| Main earbuds: Flashing red and blue; Vice Earbuds: Light off
Connected| Light off
Charging| Blue light on
Charge Over| Blue Light off
Charging Case Indicator Light
Charging| Red light flash
Charge Over| Red light on
Earbuds Charging| Battery >10%: White light on Battery <10%: White light flash
Earbuds Charing over| Light off
Attentions
- Please store and use this product in normal temperature environment;
- Do not expose the product to rain or wet environment;
- Do not throw, to avoid product damage caused by falling;
- Do not disassemble, repair and transform the product;
- Do not use chemical solvent to wipe the product;
- Do not discard or put in high temperature (temperature above 60 degrees) and fire, so as not to cause danger.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment FCC ID :2A8PV-QSMXKT21
