UNONU UT3G 7 Inch Tablet User Guide
- June 4, 2024
- UNONU
Table of Contents
UNONU UT3G 7 Inch Tablet
Safety Notices
Avoid dropping the unit on the ground or by other strong impact Do not use in
extreme cold, heat (35°C), excessively humid, dusty environment. long-term
use, do not let the machine in the sun. Try to avoid using in magnetic or
electrostatic environments If water or other liquids where to spill on the
unit then immediately shut it down and wipe the device dry before using it
again Do not use any cleaner or other liquid containing chemical ingredients
to clean the machine to avoid corrosion and moisture damage, if absolutely
necessary dealing, use a soft, dry cloth or paper towel The company’s hardware
and software were non-normal operation. the machine repair or other data loss
resulting from unforeseen circumstances or delete is not responsible for, nor
bear the losses caused. When using the flew card of T-Flash, do not remove the
card to avoid damage to the memory card or device Please feel free to back up
your important data to avoid loss. Do not disassemble the unit, otherwise it
will lose warranty rights and software may sometimes update at any time
without notice, causing discrepancies, please prevail in kind.
Device Overview
Micro USB interface
Micro USB interface can read and write U disk / removable hard disk and other equipment data
Headphone jack
You can connect a 3.5 mm stereo headset.
Front camera
You can take pictures and video.
Handset
The voice of the other party can be heard during a voice call.
Volume up key
Press this button to increase the volume.
Volume down key
Press this button to decrease the volume.
Power button
You can use the power button to power on/off, standby or wake up the device
Reset button
Press this button to restart the device
TF card reader
Support Micro SD. maximum copacity to 32GB.
Rear camera
You can toke pictures and video
Flash light
Provides LED Lighting for darker environments
SIM card slot
It can support 2 Mini SIM Cards
Speakers
Built-in speakers allow you to hear the sound without linking extra equipment.
Basic Operation
Boot
Press the On/Off button 3-5 seconds and release the seed.
Note
There is no response when you press the power button, the device may need to
recharge.
Shutdown
Press and hold for 4 seconds to enter the shutdown screen, and then click Shut Down Press for 10 seconds to force shut down
Standby
In the power-on state short press the power button to enter standby or wakes up from standby.
Restart
Press and hold for 4 seconds to enter the shutdown screen, and then click Restart.
Install SIM Card and TF Card
Install SIM Card
When installing the SIM card, the device must be turned off first.
- In the back side of the tablet locate the groove along the upper right corner to remove the SIM and TF cover.
- Insert a Mini SIM Card (2FF) into the SIM Card slot as indicated on the engraved illustrations on the device.
- Finally press the power button to start using the device.
Install TF Card
Insert the TF Card in the TF Card slot as illustrated in the image bellow to access its content of the TF card. Support insert or remove.
Connect Network
1 In the main menu or interface, choose setting application procedure. Cick Network & Internet, open Wi-Fi. MID will automatically search the available.
Wi-Fi wireless internet
Choose the Wi-Fi internet you want to connect. if it has password, it will popup the password window, enter password. cick connect Once connected you may set up your email, browse the web and access online content.
Connect to Bluetooth Devices
Bluetooth function operation
- Click setting application in main menu interface.
- Click connected devices.
- Click Bluetooth.
- Turn On the Bluetooth feature to start searching for nearby devices.
- Click the available Bluetooth device you want to connect to and a prompt will appear requesting to enter password and other device related information to connect.
After pairing is successful you may choose the operation you want to execute.
Data Speed
Icon E means
EDGE and top speed is 2176 Kbits/s (download) and 1088 Kbits/s upload.
Icon 3G means
UMTS and top speed 384 Kbits/s (download) and 128 Kbits/s upload.
lcon H means
HSPA and top speed is 72 Mbits/s (download) and 36 Mbits/s upload.
Icon H+ means
HSPA+ and top speed is 211 Mbits/s (download) and 115 Mbits/s (upload) Disclaimer. Above volues are theoretical and may vary according with the network.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>