Royal Gourmet CD1824G Barbecue Charcoal Grill Installation Guide
- June 12, 2024
- Royal Gourmet
Table of Contents
Barbecue Charcoal Grill
ASSEMBLY GUIDE
CD1824G Barbecue Charcoal Grill
Customer Service
|
---|---
https://www.facebook.com/Royal-Gourmet-879976522153340/|
https://mobile.twitter.com/RoyalGourmetUSA
FOR YOUR SAFETY!
Use outdoors only! Do not use it inside a building, garage, or any other
enclosed space.
Read the instructions before assembling and using the appliance.
DO NOT use the grill unless it is completely assembled, and all the parts are
securely fastened. This barbecue will become very hot, do not move it during
operation.
Keep children and pets away.
CONTACT US FIRST!
This grill has been made to high quality standards.
If you have any questions that are not addressed in this Owner’s Manual, or
you need parts, please call our customer service hotline or send an email to
[email protected]
Please keep this Owner’s Manual for future reference.
Learn more at: www.royalgourmetcorp.com
Parts Diagram
Parts and Hardware List
Assembly Instructions
| Step 1
Attach 2 leg bases (6) to the right legs (1), (2).
---|---
| Step 2
Attach the bottom shelf (3) to the lower right legs
with 2 bolts (A).
| Step 3
Attach the bottom shelf to the left legs (4), (5) with 2 bolts (A).
| Step 4
Slide the wheel axle (8) through the lower holes of the left leg assembly.
Then attach 2 wheel pads (E) and wheels (7) on the axle from both ends.
Secure each wheel with 1 split pin (D).
| Step 5
Assemble the damper (16) to the left panel (15)
with 1 bolt (F), 1 washer (J) and 1 nut (I) as shown.
| Step 6
Half screw 4 bolts (B) to the upper leg holes as shown.
| Step 7
Attach the left panel (15) and the right panel (12) onto the half-screwed
bolts of the legs.
| Step 8
Fasten the left panel and the right panel to the legs with 4 bolts (B).
| Step 9
Secure the front panel (13) and the rear panel (14) to the legs with 4 bolts
(A).
| Step 10
Assemble the grease deflectors (17), (18) to the left and right panels with 4
bolts (C).
| Step 11
Insert the door handle (19) into the charcoal access door (20) and secure it
from the inside with 2 washers, a nut and a split pin. The washers, nut and
split pin are preassembled on the handle.
| Step 12
Attach the charcoal access door to the front panel by sliding the pole of the
door into the front panel.
Secure with 2 split pins.
The split pins are preassembled on the charcoal access door.
| Step 13
Attach the bottle opener (21) to the main body (22) with 2 bolts (K).
| Step 14
Install the charcoal pan lifting system onto the main body.
| Step 15
Assemble the side handle (11) to the right side of the main body with 2 bolts
(G).
| Step 16
1. Rotate to separate the split pin, the washer and the crank handle (23).
2. Insert the crank handle into the main body by twisting clockwise.
3. Attach the washer back from the inside of the main body.
4. Secure it with the split pin. The split pin and washer are preassembled on
the handle.
| Step 17
The charcoal pan can be adjusted to the height as you need.
| Step 18
Assemble the main body (22) onto the cart with 4 bolts (A).
| Step 19
Assemble the lid handle (25) to the lid with 2 bolts (G).
| Step 20
Assemble the stack (28) to the lid with 2 bolts (G) and 2 nuts (L).
| Step 21
Insert the thermometer (24) into the hole on the lid and secure it in place
with a nut.
| Step 22
screw 4 bolts (H) to the legs as shown.
| Step 23
Attach the side table (9) to the bolts (H).
| Step 24
Fodable side table.
| Step 25
Slide in the ash tray (10) underneath the main body.
| Step 26
Assemble the warming rack (26) to the main body as shown.
| Step 27
Place the cooking grates (27) into the main body.